538677

Irobot Braava 380 Manual

25
Zoom out
Zoom in
Previous page
1/28
Next page
global.irobot.com 25
Problem: Likely Cause What To Do
Leaking or leaving
puddles.
Loose wick or fill
cap
Check the fill cap and the wick cap and make sure both are
securely sealed shut. Fluid will dispense at a faster rate if
these caps are not sealed.
Not wicking fluid. Wick cap requires
replacement
Refer to Reservoir Pad maintenance for instructions to
replace the wick cap.
Pro-Clean Reservoir Pad Troubleshooting
Problem: Likely Cause What To Do
Braava is not
connecting to the
Cube.
Cube and robot
position
Turn on the Cube and place it on a raised surface. Point the
blue light toward an open area of the room.
Place Braava on the floor 6 to 8 feet away from the Cube,
facing toward the Cube. Turn Braava on.
With a dry cloth on Braava, press the Sweep button. Braava
should drive toward the Cube and connect with the Cube
within 30 seconds.
If the blue Navigation Indicator lights turn solid blue on
Braava, it has connected to the Cube. It is ok if the Cube
continues flashing.
If Braava is not able to drive straight, see “Not Driving
Properly” in the General Troubleshooting chart
Cube won’t turn on. C Batteries are
dead or inserted
incorrectly
Replace with new C batteries and confirm batteries are
facing the correct direction.
Cube light is red. C Batteries are dead Replace with new C batteries.
Cube turns off while
Braava is cleaning.
Signal interference Make sure Cube is not placed within 5 feet of a Plasma
or LCD television and that the Cube is not in a room with
fluorescent lighting turned on.
Braava is out of
range
When Braava travels out of range, it is normal for the Cube
to turn off. When Braava returns it will send a message to
the Cube to turn it back on.
Multiple Cubes are
set up, but Braava
is only using one
Cube.
Cube position Braava must be able to encounter a second Cube while
cleaning to use it. Make sure the second Cube is not isolated
in an area where Braava cannot get to it.
Try placing Cubes with just 15 feet between them to help
Braava connect, then move the Cubes farther apart for
subsequent cleaning cycles. Do not move the Cubes while
Braava is cleaning.
Multiples Cubes are
set up, but Braava
is over-cleaning
many areas.
Cube channels Confirm the Cubes in use all have different channels. The
channel number can be found on the bottom of each Cube.
NorthStar
®
Navigation Cube Troubleshooting
… 25 …


Need help? Post your question in this forum.

Forumrules
1

Forum

irobot-braava-380

Reset search

  • My I robot brava is working and is fully charged but not for a long time and the red light is blinking then it beeps 2 times and switches off
    Can you help please Submitted on 21-1-2022 at 16:21

    Reply Report abuse

    • Same happened to me. I took the battery out for a day and when I put it back in, the Braava began to work correctly again. Answered on 21-1-2022 at 16:40

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Braava 380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Braava 380 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Braava 380

Irobot Braava 380 User Manual - German - 32 pages

Irobot Braava 380 User Manual - Dutch - 28 pages

Irobot Braava 380 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info