617079
5
Zoom out
Zoom in
Previous page
1/24
Next page
5
Bluetooth Connecting with Solar Stone
Connecting to One Solar Stone
1. Power on Solar Stone by holding down the power button. You will hear “Power On” for confirmation. *
2. Press the Bluetooth Connect button briefly to enter Connecting Mode - the Bluetooth LED will blink
fast, and you will hear “Pairing” to indicate this. *
3. Navigate to your device’s Bluetooth setup screen, find Solar Stone, and connect. Bluetooth LED will
light up solid when it is connected and you will hear “Pairing successful, connected” for confirmation.
*
Note: If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device
and try to connect again.
4. To disconnect, hold the Bluetooth Connect button on Solar Stone. You will hear “Disconnected” for
confirmation. *
5. If your Bluetooth device is not able to connect to Solar Stone, hold the Bluetooth Connect button on
the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Linking Two Solar Stones to each other for Stereo Sound
Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them is
connected, hold the Bluetooth Connect button to disconnect and then follow the steps below.
1. Power on each Solar Stone by holding down their power buttons. You will hear “Power On” for
confirmation. *
2. Press the Link button on each Solar Stone. The speakers will search for each other while playing an
intermittent tone. Once the stereo pair is successfully linked, you will hear “Pairing successful,
connected” followed by “Left channel” and “Right channel” on the respective speakers. *
This process may take up to 2 minutes the first time two speakers are linked. Speakers that were
previously linked will relink automatically in a few seconds if powered on in range of one another.
Note: Solar Stones should be within 30 ft. (9 m) of each other to Link properly.
3. On the Left speaker, the Bluetooth LED will blink. Press the Bluetooth Connect button briefly to
enter Bluetooth Pairing mode.
Note: The Left speaker will be the “master” speaker, and the unit from which the Bluetooth range will
be determined.
4. Navigate to your device’s Bluetooth setup screen, find Solar Stone, and connect. You will hear
“Connected” for confirmation. *
Note: If you experience trouble in connecting, select “Forget this Device” for Solar Stone on your
Bluetooth device and try to connect again.
5. To disconnect linking, hold the Link button on the “master” Solar Stone for 2 seconds. You will hear
“Disconnected” for confirmation. *
6. If your Bluetooth device is not able to connect to Solar Stone, hold the Bluetooth Connect button on
the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Note: When two speakers are linked, hold the power button on the “master” speaker to turn both
speakers off. If you want to only turn off the “slave” speaker, press and hold the power button on that
speaker. The speakers will relink automatically the next time they are both powered on.
* Tip: If you would like to disable (or enable) the voice prompts, simultaneously press the Bluetooth
Connect and Link buttons briefly.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion Solar Stone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion Solar Stone in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info