617143
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
Parts Description
1. Power – Hold this button to power Rock Speaker Bluetooth on and
off.
2. Bluetooth Connect Press this button to begin Bluetooth
connecting.
Note: Rock Speaker Bluetooth will automatically power off after 30
minutes if no device is connected. After 2 hours of no music
playing, Rock Speaker Bluetooth will automatically power off, even
if still connected.
3. Link Press this button to link two Rock Speaker Bluetooth
units together.
4. Charging Adapter Input – Insert the included charging
adapter here to charge the Rock Speaker Bluetooth battery.
5. Reset If Rock Speaker Bluetooth is working abnormally,
shutdown the unit by placing a paperclip into the Reset hole
located on the bottom of Rock Speaker Bluetooth, and gently
push until the unit turns off. Try this only after you have first
attempted to reboot Rock Speaker Bluetooth using the power
button.
6. Charging LED – This LED is solid red when the battery is
charging and turns off when the battery is fully charged/no
adapter is connected.
7. Bluetooth LED – This LED slowly blinks blue when the
speaker is powered on, blinks fast while Bluetooth searching,
and is solid when Bluetooth connected.
8. Link LED – This LED blinks fast when searching for another
Rock Speaker Bluetooth and is solid when linked to another
Rock Speaker Bluetooth.
Bluetooth Connecting with Rock Speaker Bluetooth
Connecting to one Rock Speaker Bluetooth:
1. Power on Rock Speaker Bluetooth by holding down the power button. A tone will be heard when powering on.
2. Press the Bluetooth Connect button to enter Connecting Mode.
Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. Rock Speaker
Bluetooth LED will light up solid when it is connected and play a tone.
Note: If you experience trouble in connecting, select “Forget this Device” on your Bluetooth device and try to
connect again.
Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.
3. To disconnect, hold the Bluetooth Connect button on Rock Speaker Bluetooth. A tone will be heard when
disconnecting.
4. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button
on the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Linking two Rock Speaker Bluetooth units:
Note: Ensure that the speakers are not already Bluetooth connected in single mode. If either of them is connected,
hold the Bluetooth Connect button to disconnect and then follow the steps below.
1. Power on each Rock Speaker Bluetooth by holding down their power buttons. A tone will be heard from each
speaker when powering on.
2. Press the Link button on each Rock Speaker Bluetooth. The speakers will search for each other while playing
an intermittent tone. Once found, they will play a tone to confirm they are linked. This may take up to 2 minutes
the first time two speakers are linked.
3. Press the Bluetooth Connect button on the Rock Speaker Bluetooth that you want to be the "master" (left
channel). This is the unit that your device will connect to, and the unit from which the Bluetooth range will be
determined.
4. Navigate to your device’s Bluetooth setup screen, find Rock Speaker Bluetooth, and connect. A tone will be
heard when connected.
Note: If you experience trouble in connecting, select “Forget this Device” for Rock Speaker Bluetooth on your
Bluetooth device and try to connect again.
Note: Consider updating your device’s OS if you experience trouble with connecting or playing music.
5. To disconnect linking, hold the Link button on the “master” Rock Speaker Bluetooth for 5 seconds. A tone will
be heard when disconnecting.
6. If your Bluetooth device is not able to connect to Rock Speaker Bluetooth, hold the Bluetooth Connect button
on the speaker to break previous Bluetooth connections and reset the Bluetooth module.
Note: When two speakers are linked, hold the power button on one speaker to turn both speakers off. The
speakers will relink automatically the next time they are both powered on.
Rock Speaker Bluetooth LED
activity:
Solid Red Charging LED = Battery is
charging, LED turns off when charging
is full or when no adapter is
connected.
Solid Blue Bluetooth LED =
Connected to a Bluetooth device.
Blinking Blue Bluetooth LED =
Blinks slow when powered on. Fast
blinking when searching for Bluetooth
devices to connect to.
Solid Link LED = Linked to another
Rock Speaker Bluetooth.
Blinking Link LED = Blinks fast when
searching for another Rock Speaker
Bluetooth to link to.
2
1
3
4
5
LINK
7
8
6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion Rock Speaker Bluetooth at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion Rock Speaker Bluetooth in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info