617082
4
Zoom out
Zoom in
Previous page
1/28
Next page
4
13.5V FUSE
T10AL 250V~
13.5V 10A
Quick Setup
Connection Diagram
Items not listed under the Box Contents are sold separately.
Features
1. Volume –: Decreases the speaker volume on Road Rider.
2. Volume +: Increases the speaker volume on Road Rider.
3. Tune +: Press and release this button to go to the next FM radio station.
4. Tune –: Press and release this button to select a previous FM radio station.
5. Mic +: Press and release this button to increase the level of a connected microphone.
6. Mic –: Press and release this button to decrease the level of a connected microphone.
7. Light: Press and release this button to cycle through the speaker light mode. The lights can
be set to illuminate solid, pulsate, or turn off.
8. Bluetooth Button: Press the Bluetooth button to disconnect a paired Bluetooth device.
9. Source: Press and release this button to change the listening source between FM and
Bluetooth.
10. Charging Indicator: With the battery charging indicator, when the power cable is connected,
movement of the top battery segment shows the battery is charging. When the power cable is
disconnected, the battery segment shows the level of the battery.
11. Bluetooth Icon: The Bluetooth icon will be lit solid when a
device is paired to Road Rider.
12. Antenna: Adjust this FM antenna to get the best radio
reception. Fold this down when not using the radio and
when moving the unit.
13. USB Charging Port: Connect your device’s charge cable
here to charge it. USB charging only functions when the
unit’s power is turned on.
Note: To charge smartphones and tablets faster, put
the device’s screen to sleep.
14. NFC (near-field communication): Touch and briefly
hold your supported and enabled device to the NFC
logo to pair the device.
15. Auxiliary input: This stereo 3.5mm (1/8”) input can
be used to connect a CD player, MP3 player, or other
audio source.
16. Microphone Input: This mono input accepts a 1/4"
input such as a microphone, guitar, or other musical
instrument.
17. Power Cable Input (DC):
Insert the included power cable here to power Road Rider from a vehicle’s 13,5V power
outlet.
18. Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note that the Road Rider can be
used with the power cable while it simultaneously charges the battery.
19. Power ON/OFF Switch: Turns Road Rider on or off. Please note that while Road Rider is connected to a power
source, it does not need to be powered on to charge the battery.
20. Charge LED: This illuminates when the unit is charging and goes out once charging is completed.
REAR PANEL
AC
POWER
(for charging)
TOP PANEL
MICROPHONE
MP3
PLAYER
TABLET
V
EHICLE DC
POWER
OUTLET
(for charging)
12
13
14
8
56
7
21
3
9
4
10
11
15
16
17
19
18
20
13.5V FUSE
T10AL 250V~
13.5V 10A
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion Road Rider at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion Road Rider in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info