519240

Ion RECORD 2 PC Manual

3
Zoom out
Zoom in
Previous page
1/16
Next page
3
RECORD 2 PC QUICKSTART GUIDE
CONNECTING THE RECORD 2 PC
The ION Audio RECORD 2 PC is a plug-and-play device, which means that there are
no drivers to install. The first time you connect it to your computer, it will
automatically install all the necessary driver components and be ready to use.
IMPROVING AUDIO QUALITY
If you are experiencing unexpected noise, hiss or distortion in your recordings, here are a few things you can do to improve
the quality of your sound as you use RECORD 2 PC:
• Use higher-quality RCA cables when connecting your sound source to RECORD 2 PC.
• Connect RECORD 2 PC to a different USB port on your computer. (USB ports on the rear panel typically work best.)
• Close all software applications other than your recording application (e.g., EZ Vinyl/Tape Converter).
• If you are using a laptop, disconnect your laptop's power supply.
• Experiment with connecting your computer and/or sound source to different power outlets (or the same power outlet).
• Experiment with repositioning RECORD 2 PC and other audio cables away from possible noise sources (e.g.,
computers, power cables, speakers, amps, etc.)
• Ensure the connections between all your devices are secure (including the grounding wire of your record player, if it
has one).
• Visit www.ionaudio.com/computer-optimization
for more information on optimizing your computer for audio.
AUDIO SETUP
In most cases (especially if you are using Windows) RECORD 2
PC will be automatically selected as your computer's default
recording device. If you find you are unable to record any audio
with RECORD 2 PC, follow the instructions below for your
operating system.
Also, be sure your audio software program is set up to receive
audio via RECORD 2 PC. This can usually be done in your
software's "Preferences" or "Device Setup." Please consult your
software manual for more information.
WINDOWS XP
1. Go to Start Menu Control Panel Sounds
and Audio Devices.
2. Click the "Audio" tab.
3. Under "Sound Recording," make sure USB
Audio CODEC is selected as the default device,
then click "OK."
WINDOWS VISTA
1. Go to Start Menu Control Panel Sound.
(If you don't see Sound, select "Switch to Classic
View," and the Sound Control Panel should
become available.)
2. Select the "Recording" tab.
3. Make sure Microphone – USB Audio CODEC is
set as the default device, then click "OK."
SYSTEM REQUIREMENTS:
y PC: Windows XP, Vista or 7
y Mac: OS X or higher
y USB Port
IMPORTANT:
• Adjust the volume dial (on the side of
RECORD 2 PC) to prevent distortion at loud
volumes.
• When using RECORD 2 PC with turntables,
set its switch to "PHONO." When using it with
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion RECORD 2 PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion RECORD 2 PC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info