617142
3
Zoom out
Zoom in
Previous page
1/20
Next page
3
Features
1. Power – Press this button to power Party On on and off.
The power button LED shows the state of the Bluetooth
connection. See the Party On LED activity box for more
details.
Note: Party On will turn itself off after 5 minutes of no
audio playing through either Bluetooth or the aux input.
To continue to use Party On, power on the unit by
pressing the power button. If the Party Light switch is
set to ON, the unit will turn off after 15 minutes (if music
is not playing).
2. Volume Down/Up Controls – Press these buttons to
decrease or increase the volume level for the aux input
and Bluetooth sources. Party On defaults to 2/3 volume
when it is turned on. Please adjust the volume using
your device’s volume controls and Party On’s volume
buttons.
3. Next Track – Press this button to advance to the next
track when listening to Bluetooth sources.
Note: In some apps, pressing the Next button may
advance to the next playlist or music genre.
4. Party Light Switch – Adjust this switch to turn the lights
on and off, or to put Party On into Demo Mode.
When in Demo Mode, pressing the power button:
powers on the unit (both lights and speaker)
powers on the unit indefinitely when there is a Bluetooth connection, and music is playing
powers off a Bluetooth connected unit after 2 minutes if there is no music playing
powers off the unit after 2 minutes if there is no Bluetooth connection
5. Bluetooth Disconnect – Press this button to disconnect from a previously paired Bluetooth device,
and put Party On back into pairing mode.
6. Battery Charging LED
This shows the charge status. When charging, it will be on, when fully
charged or not plugged into a charge cable, it will be off.
7. Micro-USB Charging Port – Connect the included micro-USB cable to connect Party On to a USB
power adapter connected to a power outlet or to your computer.
8. Aux Input – Connect the output of an MP3 player or other audio source to this input.
Connecting with a Bluetooth Device
1. Power on Party On.
2. Turn on your Bluetooth device.
3. Navigate to your Bluetooth device’s setup screen, find “Party On” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.
4. Play music and adjust Party On’s volume buttons.
Note: If you experience trouble connecting or playing music, update your device's OS.
5. To disconnect a connected Bluetooth device, press the Disconnect button.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the
overall volume of Party On.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
Power Button LED activity:
Solid Red LED = No Bluetooth
connection.
Solid Blue LED = Bluetooth
connected.
Blinking Red LED = Battery is low
and needs to be recharged (no
Bluetooth connection).
Blinking Blue/Purple LED =
Battery is low and needs to be
recharged (Bluetooth connected).
1
2
3
5
6
7
8
4
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion Party On at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion Party On in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info