519178

Ion EXPLORER BLUETOOTH Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
DIAGRAM AND PARTS DESCRIPTION
1. Microphone Input with Volume Control (1/4"):
This mono input accepts a 1/4" input such as a
microphone, guitar, or other musical instrument.
2. Auxiliary input: This stereo 3,5mm (1/8”) input
can be used to connect a CD player, MP3 player,
or other audio source.
3. Bluetooth: The Paired LED will be lit when a
device is paired to EXPLORER BLUETOOTH.
This LED will not be lit when EXPLORER
BLUETOOTH is first powered on (unless it was
previously paired with a device). Press the
Disconnect button to disconnect a paired
Bluetooth device.
4. Master Volume Control: This adjusts the
speaker’s main mix volume, which includes the
Microphone Input, Auxiliary Input, Tuner, and the
audio of a paired Bluetooth device.
5. AM/FM Presets: Store a favorite radio station
and quickly tune to a preset radio station. There
are 6 numeric positions for AM stations and 6
numeric positions for FM stations. To add a
preset:
A. Select either the AM or FM band and then
use the Tuner buttons to select the desired radio station.
B. Press and hold a numeric preset button to assign the current station to that
preset number. To use an added preset, tap a preset number once lightly to
go to the stored radio station.
6. Radio Selector: This switch sets the tuner to AM or FM or turns the tuner off.
(Note: This switch does not turn the unit's power off – just the tuner.)
7. LCD: Displays the current radio station.
8. Tuner: Use these buttons to search for a radio station. To "seek" (jump to the
next available station), hold this down for a few seconds until it starts to seek a
station. The unit will remember the last station you were on and start at that
station when you power off and power on again.
9. Power LED: Indicates whether EXPLORER BLUETOOTH is on or off.
10. USB Charge: Connect your device’s charge cable here to charge it. USB
charging only functions when the unit’s power is turned on.
Note: Users with iPad (3
rd
generation or higher) may
experience slower charging. We recommend charging with
the screen locked when using iPad (3
rd
generation or higher).
11. Device Cradle: Place your iPad/iPod touch®/iPhone®,
Android® or other device here to be held. These can be
connected via Bluetooth or to the aux input using the included
3,5mm (1/8”) to 3,5mm (1/8”) cable.
Note: It is recommended to remove your iPad or other device
from the cradle before transporting or traveling with
EXPLORER.
12. Antenna: Adjust this FM antenna to get the best radio
reception.
Note: To prevent accidental damage, we recommend rotating
the antenna only when it is positioned horizontally. Also,
retract the antenna when the Tuner is not in use. Note: When using AM radio if you have a Bluetooth device that is
paired, this will cause poor AM reception. Unpair your Bluetooth device in order to listen to AM radio.
13. Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note that the EXPLORER
BLUETOOTH can run off the power adapter while it simultaneously charges the battery. The charge indicator illuminates
when the battery is charging.
14. Voltage Selector*: If your unit has a voltage selector switch, change its setting only when necessary (e.g., when
traveling to a country or region with a different voltage), and replace the fuse with one with an appropriate rating (printed
under the unit’s power cable input, next to the desired voltage). Selecting an improper voltage setting or using a fuse
with an incorrect rating can damage the unit and/or fuse. If the voltage selector is covered, only remove *one* screw of
the cover and slide it aside to expose the selector.
15. Fuse Cover: If the unit’s fuse is broken or if you are changing the setting of the voltage selector switch, use a
screwdriver or other tool to lift this tab to replace the fuse. Replace it with a fuse with an appropriate rating (printed under
the unit’s power cable input, next to the desired voltage). Using a fuse with an incorrect rating can damage the unit
and/or fuse.
16. Power ON/OFF Switch: Turns EXPLORER BLUETOOTH on or off. Please note that while EXPLORER BLUETOOTH is
connected to a power source, it does not need to be powered on to charge the battery.
17. Battery Level Indicator: While the unit is powered ON and unit is not plugged in, these four lights indicate the power left
in the battery. Battery life varies based on volume and usage.
18. Charging LED: This illuminates when the unit is attached to wall power and is in the process of charging.
*WARNING: If your unit has a voltage selector
switch, change its setting only when necessary
(e.g., when traveling to a country or region with a
different voltage), and replace the fuse with one
with an appropriate rating (printed under the unit’s
power cable input, next to the desired voltage).
Selecting an improper voltage setting or using a
fuse with an incorrect rating can damage the unit
and/or fuse. If the voltage selector is covered,
only remove *one* screw of the cover and slide it
aside to expose the selector.
Android is a trademark of Google Inc.
iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
1
2
3
4
5
6
7
8
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion EXPLORER BLUETOOTH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion EXPLORER BLUETOOTH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info