617066
4
Zoom out
Zoom in
Previous page
1/36
Next page
4
Features
1. Platter – Place your record here.
2. 45 RPM Adapter Holder Holds
the included 45 RPM adapter.
When not using the adapter, please
place it in this holder.
3. Tonearm – The tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
4. Arm Clip – This specially designed
arm clip secures the tonearm while
at rest or when not in use. The arm
clip has been designed to remain in
the up position while unlocked.
5. Raise / Lower Lever – Raises and
lowers the tonearm.
6. 33 / 45 / 78 Switch* – This switch
controls the RPM of the turntable
platter.
Note: For best results when play-
ing 78 RPM vinyl records, use a 78
stylus (sold separately). Only use a
78 stylus with 78 RPM vinyl records. Purchase the
iCT06rs 78 stylus at ionaudio.com/ict06rs.
7. Autostop switch This switch turns autostop on or off.
When autostop is on, the platter will start spinning when
the tonearm is placed over the record and stop spinning
when the record has reached the end. (When autostop is
off, the platter will always spin regardless of the position
of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for
this particular record. This is generally recommended
for 45 RPM records.
8. RCA Output** The audio from a playing vinyl record
is sent to this line-level coaxial audio output. This must
not be connected to phono level devices.
9. USB Audio Output – Use the included USB cable to
connect your turntable to your computer. The USB
connection will send audio from the turntable to your
computer. Please see the Using Classic LP With Your
Computer section of this manual for information.
10. Power Cable Input – Use the included adapter to
connect to wall power.
11. Power Button – Press this button to turn CLASSIC LP
on/off.
IMPORTANT: Remove the plastic
cartridge cover (needle cover) before
o
p
eratin
g
the turntable.
**WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your
receiver if you plug in a LINE level device
into a PHONO level in
p
ut.
*If needed, you may adjust the speed of
the turntable platter. On the underside of
CLASSIC LP, remove the rubber plugs
and tighten/loosen the appropriate screw
with a screwdriver.
1
2
3
4
5
7
6
10
11
9
8
DC 12V 0.2 A
DC 12V 0.2 A
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion CLASSIC LP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion CLASSIC LP in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info