519160

Ion ANYROOM Manual

3
Zoom out
Zoom in
Previous page
1/16
Next page
3
QUICKSTART
CONNECTION DIAGRAM
FEATURES
1. POWER IN – Connect the included power cable to this
jack then connect the cable to your power source.
2. VOLTAGE SELECTOR – This 2-position switch sets the
AC input voltage for the speaker. U.S. users should set
this switch to "115V" whereas U.K. and most European
users will need to set this to "230V".
3. POWER ON/OFF SWITCH – Turns ANYROOM on or
off.
4. LINE INPUT – This stereo RCA input can be used to
connect a CD player, MP3 player, or other audio source.
To connect to a portable device with a 1/8" (3.5mm)
headphone jack, you will need a standard 1/8"-to-RCA
adapter (not included).
5. LINE OUTPUT – To play your music out of an additional
speaker, connect this stereo RCA output to a second
speaker's stereo RCA input so you can play your music out of both. To do this, you will need a standard stereo RCA
cable (not included).
6. MASTER VOLUME – This knob controls ANYROOM's volume.
7. BOOT – This LED will illuminate when ANYROOM is on.
8. STATUS – This LED will blink approximately once every five seconds when ANYROOM's transmitter and speaker are
properly synced. When the SYNC button is pressed, this LED will blink rapidly, then blink approximately once per second
during the sync process.
9. SYNC – Press this button to make the speaker search for ANYROOM transmitters in the area.
Note: Do not remove the speaker grille.
USING ANYROOM
1. Follow the instructions in the CONNECTION DIAGRAM to set up your ANYROOM speaker properly.
2. Be sure the volume levels of ANYROOM and your device(s) are turned to "zero."
3. Connect the device(s) you want to play:
a. iPod, iPhone*, or iPad*: Gently connect your iPod to the included transmitter (wireless module).
b. CD player (or other device with an RCA output): Use a standard stereo RCA cable (not included) to connect
your device to ANYROOM's LINE INPUT. Be sure to match the colors of the cable's plugs to their respective jacks
(red to red, white to white).
4. Turn on your device, then turn on ANYROOM's POWER SWITCH. The transmitter and speaker should sync up
automatically. (If they do not sync, see the manual sync instructions below.)
5. Play your device, and turn up its volume. Turn up ANYROOM's MASTER VOLUME.
To manually sync ANYROOM's transmitter and speaker:
Follow these steps if ANYROOM's transmitter and speaker do not automatically sync after powering on. You can also use these
steps to sync multiple ANYROOM speakers to the same transmitter.
1. Press and hold the transmitter's SYNC button (using a paperclip or pen). Its red LED will blink rapidly.
2. Within five seconds, press the speaker's SYNC button. Its STATUS LED will blink rapidly.
3. Wait a minute or two – the transmitter and speaker should sync automatically. Their LEDs should blink only about once
every five seconds when the dock and speaker are properly synced. Once synced properly, they should do sync
automatically when you turn on ANYROOM's power in the future.
You are cautioned that changes or modifications not expressly approved to a part responsible for compliance could void the
user’s authority to operate the equipment.
iPod*
(not included)
Power
* iPo
d
, iPhone, and iPa
d
ar
e
trademarks of Apple, Inc., registered i
n
the U.S.A. and other countries.
CD player
(not included)
To LINE INPUT of second
ANYROOM speaker (sold
separately).
BOX CONTENTS
ANYROOM speaker
ANYROOM transmitter
(wireless module)
Power cable
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
123
4455
6
9
7
8
Transmitter
(wireless module)
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ion ANYROOM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ion ANYROOM in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info