the temple and the ambient temperature is not within the
measuring range (see ”Technical Specifications”). Ensure
that the SCAN-button is not released before the
thermometer has been drawn completely across the
forehead.
3. Warning ”weak battery”
• The battery is too weak for a measurement to be made.
- replace battery (see ”Replacing the battery”).
Technical Specifications
Measurement range 10 °C to 50 °C
Laboratory accuracy ±0,3 °C The measuring accuracy of a contact
thermometer in the range 37 °C to 39 °C is ±0,1 °C
Smallest measurement interval 0,1 °C
Memory function The device has 10 memory spaces! When turned
on the thermometer displays the last temperature measured. When
changing the battery, all saved values will be lost!
Operating mode The thermometer works in a regulated mode.
Raised temperature alarm Sad face, accompanied by one long and
then two short sounding signals.
Easy to clean, non-polluting construction
The tip of the probe is equipped with a water-tight lens, which can be
washed-off with water.
Conserves energy Switches of automatically after one minute when
not in use.
Warning remarks Symbol for ”weak battery”. Symbol ”Lo”+”Hi”/”Err”
as an indication that the device is operating outside the measuring
range/ambient operating conditions.
Service life of the battery The battery supplied is sufficient for at least
5000 measurements.
Battery disposal Used batteries do not belong in the household waste.
You are legally obliged to dispose of the batteries. Dispose of them via
your specialist electrical supplier or local collecting point for recyclable
waste. Note: Batteries containing pollutant substances are marked as
follows: Pb = battery contains lead, Cd = battery contains cadmium,
Hg = battery contains mercury.
38
