54973
24
Zoom out
Zoom in
Previous page
1/28
Next page
What you should know about the appliance
This manicure and pedicure appliance is equipped with top-quality attachments. It has a cuticle pusher
and 7 attachments with a long-life sapphire coating or polishing felt. Together with the 2-level speed
control and clockwise/ anticlockwise operation, this ensures a professional pedicure and manicure that
would otherwise only be possible at a podiatrist.
General
• This instrument is intended only for the treatment of hands (manicure) and feet (pedicure).
• Select an attachment and push it onto the instrument spindle using a slight pressure. To remove: pull
the attachment and instrument apart in the axial direction (straight).
• To turn the appliance on, move the rotary switch to the left (anticlockwise operation) or right
(clockwise operation). In each case, you can select from two speeds (I and II).
• All file and cutting attachments are coated with a sapphire grain. This guarantees extremely long life
and almost guarantees freedom from wear.
• Do not exert heavy pressure and always guide the attachments carefully over the surface to be
treated.
• Move the instrument under light pressure in circular movements slowly over the parts to be treated.
• Note that the cutting attachments will have a reduced effect if the skin is softened or moist. For this
reason, do not carry out any pretreatment in a bath.
• Do not remove all the callus skin in order to retain the natural protection of the skin.
• Always ensure that the spindle can rotate freely. It must never be permanently jammed, otherwise the
instrument will become too hot and suffer damage.
• After every use, apply moisturizing cream to the parts treated.
Important: Check the results during treatment. This is particurlarly important for diabetics, since
theirs hands and feet are less sensitive.
Attachments
As these are attachments for use by professionals, we would ask you to handle them with care as they
can cause injury when used incorrectly. Particular caution is advised at higher speeds.
The following attachments are provided with your appliance:
A - Sapphire cone
Removal of dry skin or calluses from the soles of the feet and from the heels and
for manicuring the nails.
B – Felt cone
Smoothing and polishing the edge of the nail after filling as well as for cleaning
the nail surface. Always polish in circular movements and do not allow the felt
cone to rest in one place, otherwise friction could cause heat to develop.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum MC30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum MC30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info