54877
14
Zoom out
Zoom in
Previous page
1/15
Next page
Before plugging into a socket, check that the voltage in
your home corresponds with the voltage printed on the
bottom of the appliance. Put the appliance on a cool,
at and stable surface. Connect the appliance to an
earthed socket. You can adjust the length of the cord by
pulling it out from, or pushing it into, the interior of the
appliance.
1. Open the lid by pushing the button.
2. Fill the kettle with an amount of water and close the
lid by pushing it down.
3. Place the kettle on the base and make sure that the
plug is in the socket.
4. Switch the kettle on by pressing the on/off switch
down to position 1.
The red pilot lamp will light up. The kettle will now
boil the water.
5. The kettle will automatically switch off when the
water is boiled.
The pilot lamp will switch off.
If you want to boil the water again, you must wait
approx. 30 seconds before you switch it on again, so
that the switch can cool down. The kettle can also be
switched off at any time with the switch. When you take
the waterkettle off the base while boiling, it will switch
off. When you place the waterkettle back on the base
the water will continue boiling. If that is not necessary,
switch the kettle of by pushing the switch to position 0.
Attention! Never switch the kettle on without water.
If, for whatever reason, the kettle is switched on without
water, the dry-boilprotection will automatically switch
the kettle off. Put the switch back to "0". In this case
take the kettle off the base and let it cool down for
several minutes. After that, rell the kettle and switch it
on again. Make sure that the lid is closed properly, if not
the kettle will go on boiling and will not automatically
switch off.
Attention! It may occur that you see condensation on the
base. This is completely normal and has no consequences
for the use of the waterkettle.
Before you use the appliance for the rst time, please do
as follows: Carefully unpack the appliance and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. Check the
appliance after unpacking for any damage, possible from
transportation. Before plugging into a socket, check
that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance. Put the
appliance on a at, stable and heat resistant surface.
Before use you must ll the waterkettle to the maximum
level and boil this amount. Do this twice. Throw away
the boiled water and rinse the kettle with cold water.
The appliance is now ready to use. The kettle is only
suitable for boiling water. Never
ll the kettle with milk,
tea, coffee or other drinks. The minimum amount of
water must be 0,2 liters. The maximum amount of water
to be used is 1,0 liters.
2 | BEFORE FIRST USE 3 | BOILING WATER
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HW37B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HW37B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info