551579
24
Zoom out
Zoom in
Previous page
1/28
Next page
Slide the top part of the chimney in the bottom part. Make sure the top part still protrudes from the bottom part by fixing it
temporarily with a piece of tape.
First mount an exhaust-air pipe on the cooker hood [1] and place both chimney parts on the cooker hood. Pull the exhaust-air
pipe through both parts upwards and connect it to the duct. Fix the bottom part of the chimney to the cooker hood with two
screws 4x8mm [2] and at the top with two screws 4x40mm in the slots. Remove the piece of tape and pull the top part towards
the upper plate. Fix this part on both sides with two screws 4x8mm [3].
Check before the first use if all the protective film has been removed.
INSTALLATION OF THE COOKER HOOD FOR RECIRCULATION
When there is no duct to the outside, you don't have to install an exhaust-air pipe on the cooker hood. Install the cooker hood
according to the same steps as before and finally place two carbon filters on the motor.
Plate 3
screws
screws
ELECTRIC CONNECTION
Make sure the supply voltage ratings correspond with those stated on the rating plate. Plug the appliance in. The cooker hood is
provided with a plug. Make sure the plug remains accessible. Place the socket, if necessary, out of sight behind the exhaust-air pipe.
Attention: if you want to make a fixed connection, ensure that a multi-pole switch with a distance between contacts of 3 mm is
installed in the supply cable.
24 English
1 2
Plate 3
screws
screws
3
AKB9011-AKB9021-instructions.indd 24 27-8-2014 9:29:53
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AKB9011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AKB9011 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info