752329
36
Zoom out
Zoom in
Previous page
1/38
Next page
351
A
S AVE THESE INSTRUCTIONS
(351IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 09/30/2020
English
Page 36
WIFI APP TROUBLESHOOTING (continued)
IMPORTANT
If you continue to experience diffi culty, please contact our Consumer Service Department for
assistance. See separate “Authorized Service Centers” sheet.
PROBLEM CAUSE SOLUTION
OFFLINE AFTER
SUCCESSFUL
INITIAL SETUP
AND PAIRING
LED display is off
E81
Control panel charging
failed
Control Panel failure
Press any button to reactivate the spa control panel.
Reset the GFCI/RCD, restart all over again and make sure the
wireless control panel is fully charged.
Make sure the surface between the back of the wireless control
panel and the control base charging dock is clean, dry and free
of obstruction.
Try to pair the mobile device with the spa control panel again.
If problem persists, contact Intex Service Center.
WiFi signal failure
WiFi LED indicator light is
blank
WiFi LED indicator is fast
ashing
Reboot the WiFi router by powering it off for one minute
and then turning it back on. Refer to your WiFi router’s
troubleshooting guide for more assistance.
Make sure your mobile device and spa control panel are
connected to the same WiFi router signal, and your mobile
device can access and browse the internet from the location
where the spa is setup.
If you cannot move your spa, then you need to move your WiFi
router or add a repeater/signal booster so that you can receive
signals from your WiFi router at your setup spa location.
Power off the spa control base and the wireless control panel,
restart the spa and try to pair the spa control panel again.
If the problem persists, contact Intex Service Center.
The App does not load Force-quit the App, re-launch the App and try to pair the spa
control panel with your mobile device again.
Make sure your mobile device data function is activated and
the device can access and browse the internet.
If the mobile data function (2G, 3G, 4G and LTE) works, try
pairing the spa control panel to your Wi-Fi router network. See
WiFi pairing/binding section.
Other interferences Make sure there are no big metallic walls, objects between the
spa and your WiFi router signal.
Make sure the surface between the back of the wireless control
panel and the control base charging dock is clean, dry and free
of obstruction.
Always return the wireless control panel to the spa control base
charging dock after using the spa or when the spa is not in use.
The “Remote Control”
function is off Under “My Devices”, touch the setting ( ) icon inside the
“Spa” icon, and slide the bottom next to the "Remote Control"
option to switch on.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex PureSpa SC-WF20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa SC-WF20 in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa SC-WF20

Intex PureSpa SC-WF20 User Manual - German - 38 pages

Intex PureSpa SC-WF20 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info