752346
2
Zoom out
Zoom in
Previous page
1/2
Next page
139
PO
(139PO) AP640R 6-C BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 05/14/2012
139
PO
(139PO) AP640R 6-C BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 05/14/2012
SAVE THESE INSTRUCTIONS
Page 3
SAVE THESE INSTRUCTIONS
Page 4
©2012IntexMarketingLtd.-IntexDevelopmentCo.Ltd.-IntexTradingLtd.-IntexRecreationCorp.
Allrightsreserved/Tousdroitsréservés/Todoslosderechosreservados/AlleRechtevorbehalten.
PrintedinChina/ImpriméenChine/ImpresoenChina/GedrucktinChina.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadasenalgunospaísesdelmundobajolicenciade/WarenzeichenverwendetineinigenLändernderWeltinLizenzvon/IntexMarketingLtd.to/à/
a/anIntexTradingLtd.,IntexDevelopmentCo.Ltd.,G.P.OBox28829,HongKong&IntexRecreationCorp.,P.O.Box1440,LongBeach,CA
90801•DistributedintheEuropeanUnionby/Distribuédansl’UnionEuropéennepar/DistribuidoenlauniónEuropeapor/VertriebinderEuropäischen
Union durch/IntexTradingB.V.,Venneveld9,4705RRRoosendaal–TheNetherlands Consumer Service 1-800-234-6839
8. Lie down on the airbed to test the firmness.
9. If the sleeping surface is too hard, adjust the
firmness by turning the control dial
counterclockwise gradually until air starts to exit
through the air passage. See Fig (7). Turn the
control dial fully clockwise when the desired
firmness is achieved. See Fig (8). If the airbed
becomes too soft repeat step #5 thru #9 as
necessary.
Proper inflation of the airbed.
The ambient temperatures of air have an effect on the airbed internal pressure. At low ambient
temperature the air will contract within the airbed and the airbed will feel softer: add air as
necessary. At high ambient temperature the air within the airbed will expand significantly and
the airbed will become hard and may burst: release air to avoid damage to the airbed or to
soften the feel. Do not expose the airbed to extreme temperatures (hot or cold).
Stretching is a natural characteristic of new vinyl. During initial use, the airbed may become soft
and require additional inflation to maintain desired firmness. This is normal for the first few days
of use.
Dimensions shown are approximate and will vary due to the vinyl temperature and the air
temperature.
InnoeventshallIntex,theirauthorizedagentsoremployeesbeliablefordamages(such
aspinholes)totheairbedcausedbynegligence,ordinarywearandtear,abuseand
carelessness,orexternalforces.
IMPORTANT NOTE
DEFLATION
1. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See
Fig (9).
2. Press "I" to switch ON. See Fig (5).
3. When the airbed is completely deflated, begin rolling the airbed from the foot of the
airbed towards the head of the airbed where the pump is located. See Fig (10).
4. When all air is removed from the airbed, press "O" to switch OFF. See Fig (6).
5. Turn the control dial fully clockwise. See Fig (11).
INFLATION OPTION
1. If electrical power is not available then a conventional
foot or manually operated air pump can be connected to
the control dial valve for inflation. See Fig (12).
2. Turn the control dial clockwise until arrow points to the
inflation mark ( ).
3. Insertairpumpnozzletothecontroldialvalvetoinflate
the airbed.
Inflate only with a low pressure inflator. Do not over inflate. Fill with cold air only.
IMPORTANT
STORAGE
1. Deflate the airbed following the "DEFLATION" instructions.
2. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See
Fig (9).
3. Make sure the airbed is clean and dry.
4. Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs
(13 - 17). Fold the airbed loosely and avoid sharp bends, corners and creases which can
damage the airbed.
5. Turn the control dial fully clockwise. See Fig (11).
6. Place the airbed inside the storage bag and store in a dry, cool storage location.
FIG(7) FIG(8)
FIG (10)
FIG(9)
TM
Model AP640R
Fast-Fill
FIG (11)
Fast-Fill
Model AP640R
TM
TM
Model AP640R
Fast-Fill
FIG (12)
FIG(17)
FIG (15)
FIG (13) FIG (14)
FIG (16)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex AP640R Pump at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex AP640R Pump in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex AP640R Pump

Intex AP640R Pump User Manual - German - 2 pages

Intex AP640R Pump User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info