686590
19
Zoom out
Zoom in
Previous page
1/21
Next page
250
A
S AVE THESE INSTRUCTIONS
(250IO) SPA (JET + HARD WATER) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2015
English
IMPORTANT
The ambient temperatures of air have an effect on the spa tub internal pressure. Air inside of the
spa tub may expand and contract with varying temperature leading to reduce pressure inside
of the spa tub. If this occurs, simply use the provided pressure gauge to check the internal air
pressure and add more air if necessary.
Page 19
MAINTENANCE (continued)
1. Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
2. Reverse set up instructions to de ate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3. Spa Tub de ation with the Electric Air Pump (see drawing 17).
a) Attach the in ation pump adaptor (24) to the de ation port.
b) Connect the in ation hose (7) to the in ation pump adaptor.
c) Insert the other end of the in ation hose (7) into the valve and turn to
the right to lock it in position. Switch on the electric air pump to de ate.
4. Make sure all the spa components and accessories are thoroughly clean
and dry before storage. Air-dry the spa tub in the sun for an hour before
folding.
5. Fold the spa tub loosely and avoid any sharp corners to prevent damage
or leakage to the spa tub liner.
6. Prepare additional new cartridges for next time use.
7. Store the spa tub and accessories in a dry, temperature controlled,
between 0º – 40ºC (32º – 104 ºF), storage location.
8. The original packing can be used for storage.
STORAGE
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
Clean and dry the area to be repaired thoroughly.
Remove the patch backing paper and press patch rmly over the puncture. Smooth out the surface to
remove any air bubbles under the patch.
17
9
7
24
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex 28422 - PureSpa SPJ-H-20-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex 28422 - PureSpa SPJ-H-20-1 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex 28422 - PureSpa SPJ-H-20-1

Intex 28422 - PureSpa SPJ-H-20-1 User Manual - German - 18 pages

Intex 28422 - PureSpa SPJ-H-20-1 User Manual - Dutch - 22 pages

Intex 28422 - PureSpa SPJ-H-20-1 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info