616630
4
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH - 7 ENGLISH - 8
If you select a wrong language, follow the steps below:
1. Turn o the F5MC. (Press the MFB for 5s, or unl the led lights RED).
2. Turn on the F5MC (Press the MFB for 2s).
3. Short press UP buon (2).
4. Short press MFB buon (1).
5. Short press UP buon (2).
6. Press MFB when you hear your language.
2.6 Audio priories
F5MC determinates the audio source priority in the following way:
1. Mobile phone
2. Intercom
3. A2DP audio (Smartphone/Player MP3)
4. FM Radio
5. AUX line-in
F5MC automacally manage priority when audio sources play simultaneously, using the
sequence above.
Example:
Incoming mobile call interrupt ongoing A2DP music.
Incoming Intercom call does not interrupt an ongoing mobile phone call; the rider,
who started the intercom call, will hear a “connection failed” message.
2.2 Status led (Pic.2)
Standby BLUE led (6) ashes every 3 seconds.
Intercom acve BLUE led (6) is solid .
Interphone connected with
mobile/GPS
BLUE led (6) ashes twice every 3 seconds.
Pairing mode BLUE (6) and RED (7) led ash alternately.
Charging
ORANGE led (7) is solid. When charging is completed
led (7) becomes solid GREEN.
Baery low Led (7) is solid RED.
2.3 First Switch on (only twin pack)
Press MFB (1) buon to turn on both units. The units are already factory-
paired, wait for your language and press MFB (1) buon to conrm.
Later two units will be in “INTERCOM” Standby status (Chapter 4).
2.4 First Switch on (only single pack)
Press MFB (1) buon to turn on unit, wait for your language and press MFB (1) buon
to conrm.
Unit will be in “INTERCOM” Standby status (Chapter 4).
The unit will enter in “PAIRING MODE, choose one of these:
- Short press of MFB (1) buon – pairing with mobile phone or GPS navigator.
- Short press of Up (2) buon – intercom pairing with INTERPHONE device.
- Short press of DOWN (3) buon intercom pairing with other brand device(NON
INTERPHONE) ANYCOM mode.
- Long press of MFB (1) unl the beep – to cancel “PAIRING MODE. Unit will enter in
“INTERCOM” Standby status(Chapter 4) and Blue led (6) will ash every 3 seconds.
2.5 Language selecon (aer rst switch on):
F5MC in Standby mode (Blue led(6) ashing), press UP buon(2) and then MFB
buon(1) to enter in “SETUP” menu. Press again UP buon(2), “LANGUAGE
SELECTION” start, wait for your language and then press MFB buon (1)to conrm it.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphone-Cellularline F5MC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphone-Cellularline F5MC in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Interphone-Cellularline F5MC

Interphone-Cellularline F5MC User Manual - German - 12 pages

Interphone-Cellularline F5MC Quick start guide - Dutch - 2 pages

Interphone-Cellularline F5MC User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info