534289
3
Zoom out
Zoom in
Previous page
1/4
Next page
...1-5
G/I
Edition 1
Cleaning instructions
Clean the product with a dry, lint-free cloth. A glasses cleaning cloth is ideal.
Intended use
This electronic appliance is intended for time display and the described additional features. Any
other use or modification of the electronic appliance does not comply with the intended uses.
The manufacturer is not liable for damages caused by improper use or misuse. The device is
not intended for commercial use.
Manually initiate radio reception
Radio time signal reception can be started manually.
Press A to select the date display mode.
Press and hold A for 3 seconds. The reception is started and the radio reception control symbol
R will appear blinking on the display. Radio reception takes between 3 and 9 minutes to
complete and can be interrupted by pressing any button.
The radio reception control symbol R will appear continuously on the display while the reception
is successful.
Changing the time zone
Press A to select time zone display mode.
Press and hold B for 3 seconds. Press A to select the correct time zone:
Uk = Greenwich Mean Time (UTC), GE = Central European Time (UTC+1), GR = Eastern
Europe (UTC+2).
Confirm your selection by pressing B. The hands will automatically move to the appropriate
time.
Manual time setting
Press A to select the date display mode. Press and hold B for 3 seconds.
The hours will blink on the display. Set the hours by pressing A and confirm your setting by
pressing B.
The minutes will blink on the display. Set the minutes by pressing A and confirm your setting by
pressing B.
The hands will automatically move to the appropriate time.
Day of the week language selection
Press A to select the day of the week display mode. Press and hold B for three seconds.
The set language will blink on the display. Select your preferred language by pressing A:
En = English, DE = German.
Confirm your selection by pressing B.
Reset and calibration
Replacing the battery, strong magnetic fields or strong vibrations may cause the hands to lose
synchronisation with the internal time.
In this case the hands must be recalibrated.
Press and hold A and B together for 5 seconds.
'HP' will appear blinking on the display.
Press A to turn the minute hand by on sixth of a minute.
Press and hold A for speed setting. The minute hand will turn continuously and can be stopped
by pressing any button.
Turn the minute hand to exactly 12 o'clock and press B.
The hour digits will appear blinking on the display.
If the hour shown on the display does not correspond to the time shown by the hands, the
correct hour must be set. Press A to set the hours and press B to confirm your setting.
The watch will now attempt radio reception.
Water resistance
Water resistant up to 3 bar. The bar value specifies the atmospheric overpressure which is applied
during testing (DIN 8310).
-2-
-3-
3 BAR WATER RESISTANT
5 BAR WATER RESISTANT
10 BAR WATER RESISTANT
20 BAR WATER RESISTANT
G/I
G/I
Radio controlled wrist watch
Display modes
Press A to select one of the display modes of the wrist watch:
Safety notes
This electronic appliance must be protected from water and other hazards. It is not a toy
and children should not use it unsupervised.
-1-
G/I
Disposal of the electronic appliance
This electronic appliance may not be disposed of with normal household waste.
Dispose of the unit at an approved disposal facility or at your local recycling centre.
Please observe the current rules and regulations when disposing of the appliance.
Contact the disposal system if in doubt.
Replacement of battery
Battery replacements must be performed by an expert to avoid damaging the case or gaskets.
Disposal of the batteries
Please dispose of your batteries properly in containers especially set up at retailers.
Batteries do not belong in household waste. Dispose of the batteries at an approved
disposal facility or at your local recycling centre. Contact the disposal system if in doubt.
Warranty
We provide a 3-year warranty for this item. The warranty period starts from the date of sale
(receipt, proof of purchase). Within this period we rectify all faults which are attributable to
material and manufacturing defects at no cost. For damage which is attributable to improper
treatment, e.g. dropping, knocking, or water damage, there is no warranty claim.
Declaration of Conformity
If used as intended this product conforms to the basic standards of § 3 and the other relevant
provisions of the FTEG (Section 3 of the R&TTE directive). The declaration of conformity may
be requested here: conformity@digi-tech-gmbh.com
(2-LD2970-1/2 = 1 x CR2016)
-4-
G/I
-5-
1. 2.
G/I
date day of the week time zone seconds
2-LD2970-1
2-LD2970-2
Strap Shortening Instructions
Your watch strap may be shortened in two ways.
1. At the buckle (Illustration 1)
Unlock the safety cover (if applicable) and open the buckle. The strap is held in position by a
spring bar. The spring bar can be compressed with a pointed tool to enable shortening of the
strap. Move the strap to the desired position and allow the spring bar to lock into place.
2. At the strap (Illustration 2)
Shortening of the strap can also be achieved by removing segments. Open the buckle and
remove the spring bar as described in part 1.
Place the watch on a soft surface with the dial facing downward. The segments that can be
removed are marked with an arrow. Push a pointed tool into the opening on the backside of the
strap and push the bolt out of the strap in the direction of the arrow. Pull out the bolt (you may
need to use tweezers).
The strap can now be disassembled.
Remove as many segments as necessary in the described fashion and reassemble the strap by
pushing the bolt inwards in the opposite direction of the arrow. Reassemble the buckle with the
spring bar.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inter-Quartz 2-LD2970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inter-Quartz 2-LD2970 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inter-Quartz 2-LD2970

Inter-Quartz 2-LD2970 User Manual - German, Dutch, French, Italian - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info