688780

Innova 2.0 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
S
I
U
1.3
EN
USER MANUAL
Description of operations
It is possible to select the various modes by pressing the
buttons (see paragraph entitled Description of operations).
The remote control provided has been designed to
be functional and hard-wearing, however, it must be
handled cautiously.
Avoid:
- leaving it exposed to rain, pouring liquids on it or
dropping it into water
- hitting it or dropping it on hard surfaces
- leaving it under the sun
- placing obstacles between the remote and the
appliance while using it.
In addition:
- if there are other appliances using remote controls in
the room (TV, radios, stereos, etc.), interferences may
occur
- electronic or fluorescent lamps can interfere with
communication between the remote and the appliance
- remove the battery if not using the remote for a long
time.
Only CR2012 3V dry lithium batteries must be used
(supplied). Used batteries must be handed over to
the specific collection areas as arranged by the Local
Authorities for this type of waste.
In order to insert the batteries, open the specific cover
in the bottom part of the remote. The battery must be
inserted respecting polarity. Once the battery is inserted,
close the cover.
In order to manage the appliance using the remote control
and the touch-screen, the main switch on the electrical
power supply line must be turned on (its exact position can
be indicated by the technician who installed the appliance)
or the power supply plug must be connected to the system
socket.
Once such operations have been performed, it is possible
to manage the system by holding down the symbols on the
touch-screen (for 3 seconds) or by using the remote control.
In order to send commands to the internal unit, the top part
of the remote must point towards the display of the internal
unit. The reception of the command is confirmed by a beep
and by the display. The maximum distance for the remote
control to work is approximately 8 metres.
General start-up and management
Battery insertion
Key/Display
Operation
The keys of the remote control and of the touch screen display perform the same functions.
When the unit is turned on, the 3 digits on the display will show the set-point.
• It is possible to set the set-point between 16 and 31°C, to which temperature the unit will bring the room.
If the temperature is set too low or too high, not only it is unhealthy, but it is also an unnecessary
waste of energy.
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

innova-2.0

Reset search

  • i need a simple instruction on hoe to operate the remote control for the innova2.0vertical 10-12DC Inverter A/C unit this is for a nursing home where the residents need the simple example please help i checked the operators manual and its to much for them to comprehend thanks Submitted on 15-7-2022 at 15:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innova 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innova 2.0 in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Innova 2.0

Innova 2.0 Installation Guide - English - 20 pages

Innova 2.0 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info