OPTIONS
- If the selected option is not compatible with the set wash cycle, the
indicator light will ash and the option will not be activated.
Stain remov al
This option allows f or selec ting the type of dir t so as to optimally adjust
the cycle for removing the stains . T he following types of dir t can be
selected:
- F ood, for stains caused by f oodstus and beverages, f or example.
- Work, for g rease and ink stains, for example.
- Outdoor , for mud and grass stains, f or example.
! The wash cycle duration varies accor ding to the type of selec ted dirt.
Delayed S tar t
T o set a delayed start for the selected c ycle, pr ess the corresponding
button repeatedly un til the desired delay period has been reached. When
this option has been activated, the symbol lights up on the display . T o
remove the dela yed star t setting, pr ess the button until the word “OFF ”
appears on the display .
T emperature
Each wash cycle has a pre- dened temperature . T o modify the
temperature , press the button. T he value will appear on the display .
Spin
Each wash cycle has a pre- dened spin speed. T o modify the spin speed,
press the button. The value will appear on the display .
Setting the drying c ycle
The r st time th e but ton is presse d, the machin e will automatica lly
sele ct th e maxi mum dr ying c ycle which is comp atible with th e sele cte d
wash c ycle. Subsequ ent presses will d ecrease th e dr ying level a nd then the
dr ying tim e, until the c ycle is excluded comp letel y (“OFF”).
Dr yin g may be set as fo llows:
A- Based o n the desire d laundr y dr yn ess level:
Cupboar d : suit able fo r laundr y which c an be put b ack in a cupb oard
without being ironed.
Hanger : i deal for clo thes which do n ot nee d to be drie d fully.
Iron : suit able fo r clothes whi ch will nee d ironing af ter wa rds. the
remaining damp ness sof tens creas es, mak ing them easie r to remove.
B - Based on a s et time p eriod: b et ween 210 an d 30 minutes.
If your laundr y l oad to be w ashed and dr ied is much greater tha n the
maxim um stated l oad (see adjacent t able of wash c ycles), per form the
wash c ycle, and when th e c ycle is complete, divi de the garm ents into
groups and p ut some of th em back in th e drum. At this point, f ollow the
instructions pr ovided for a “Dry ing only ” c ycle. Rep eat this procedu re for
the remaind er of the lo ad. Note: a coolin g- down p erio d is always adde d to
the end of ea ch dr ying c ycle.
Drying only
Press b ut ton to per form th e dr ying - only c ycle. Af ter sel ec ting the
desired c ycle (compatible wi th the t ype o f garment s ), press but ton to
exclude the w ashing phase an d star t the dr ying phase at th e maximum
level for the s ele cte d cycle. T he dr yin g level or time may b e set and
change d by pressing the dr y ing but ton .
(Not compatibl e with c ycles 1 3 a nd 1 4) .
Push & W ash + Dr y
This function makes it possible to start an automatic wash and dr ying
cycle either when the machine is o without having to press the ON/OFF
button in advance , or af ter switching on the machine without having
activated any button and/or selector (otherwise the Push&W ash+Dr y
function will be deactivated). T o start the Push&Wash+Dry cycle press
and hold the button for 2 seconds . T he indicator lights up to show
that the cycle has star ted. The wash and dr ying cycle is ideal for cotton
or synthetic fabrics, as it washes them at a temper ature of 30° and a
maximum spin speed of 1000 rpm. During the dr ying cycle the maximum
temperature is 60°C. A t the end of the c ycle the residual humidity will be
the same as for the “ ” level. Max recommended load 3 kg.
The time displayed is the maximum time allo wed by the Push&W ash+Dry
cycle. If the load is lower than the maximum load or most garment are
made of synthetic materials, the actual time of the cycle will be shorter .
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the door .
2. Pour the det ergent and/or additives.
3. Start the c ycle by pressing and holding the P ush&Wash+Dry button for 2
seconds. The relevant indicator light will turn green and the door will lock
(the DOOR L OCKED symbol is lit).
NB: starting the c ycle through the Push&W ash+Dr y button activates an
automatic non-customisable wash and drying c ycle recommended f or
cotton and synthetic fabrics.
4. The automatic cycle can be used only for washing , excluding the drying
phase. P ress the Push&W ash+Dr y button and then the drying button :
the drying icon of the “ ” level will switch o . Maximum load for washing-
only is 4 kg. The c ycle cannot be customised further .
T o open the door while an automatic cycle is under way , press the ST ART/
P A USE button. If the DOOR LOCKED symbol is o , the door may be opened
only during the washing phase. P ress the ST AR T/P A USE button again to
restart the wash c ycle from the poin t at which it was interrupted.
5. At the end of the wash cycle the word END will ligh t up.
TIPS AND SUGGESTIONS
Divide the laundry according to:
T ype of fabric (cotton, mixed bres , synthetics, wool, garments to be
hand-washed). Colour (separa te coloured garments from whites , wash new
coloured garments separat ely). Delicates (small garments – such as nylon
stockings – and items with hooks – such as bras: insert them in a fabr ic bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dr yer and the
drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washer - dr yer o
and disconnect it from the mains power . D o not use ammable liquids to
clean the washer-dryer.
Disconnect the water and pow er supplies
Close the water tap after every wash. This will limit wear on the hy draulic
system inside the washer-dryer and help to prevent leaks . Unplug the
washer-dr yer when cleaning it and during all maintenance w ork .
Clean the washer-dryer
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water . Do not use solvents or
abrasives. The washer-dr yer has a “ Auto- clean ” c ycle f or its internal par ts; it
must be run without any load in the drum.
T o optimise this c ycle, it is possible t o use either detergent (10% of the
quantity specied for lightly soiled garments) or special additives t o clean
the washer-dr yer . W e recommend running a cleaning cycle every 40 wash
cycles. T o star t the cycle press buttons and simultaneously for 5
seconds. The c ycle will start automatically and will run for about 80
minutes. T o stop the cycle, press the ST ART/P AUSE button.
Clean the detergent dispenser dr awer
W ash it under running water; this operation should be repeated frequen tly.
Care f or the door and drum
Always lea ve the por thole door ajar in order to prev ent unpleasant odours
from forming .
Clean the pump
The washer-dryer is tted with a auto- cleaning pump that does not require an y
maintenance . Small items (such as coins or buttons) may sometimes fall into
the protective pre-chamber situated at the base of the pump.
! Make sure the wash cycle has ended and unplug the appliance.
T o access the pre- chamber:
1. remove the c over panel on the front of the machine by rst pr essing it
in the centre then pushing down wards on both sides to extract it;
2. loosen the drainage pump cov er by turning it anti- clockwise: it is
normal for some water t o leak out;
3. clean the inside thoroughly;
4. screw the cov er back on;
5. put the panel back in place, making sure the hooks slot in place bef ore
pushing the panel onto the appliance .
Check the water inlet hose
Check the water inlet hose at least once a y ear . If it is cracked or broken, it
must be replaced: during wash cycles, the high pr essure of the water
could suddenly split the hose open.
! Never use hoses that hav e already been used.
L OAD BALANCING SY STEM
Before ev er y spin c ycle, t o avoid excessiv e vibrations before every
spin and to distribute the load in a uniform manner , the drum rotates
continuously at a speed which is slightly gr eater than the washing
rotation speed. If , after several attempts , the load is not balanced
correctly , the machine spins at a reduced spin speed. If the load is
excessiv ely unbalanced, the washer-dr yer performs the distribution
process instead of spinning . T o encourage improv ed load distribution and
balance, w e recommend small and large garments are mixed in the load .
A CCESSORIES
Contact our T echnical Assistance Ser vice to check whether the following
accessories are av ailable for this washer-dr yer model.
Stacking kit
With this acc essor y you can secure the tumble dryer to the upper part of
your washer-dryer to save space and facilitate loading and unloading of
the tumble dryer .
TRANSPORT AND HANDLING
Do not lift the washer-dr yer by gripping it from the upper section.
Unplug the appliance and close the water tap . Check that the door and
detergent dispenser dra wer are tightly closed. Detach the lling hose
from the water tap then detach the dr ain hose. Empty all the water
remaining in the hoses and secure the latt er so that they do not get
damaged during transport. Apply the transpor t bolts back on. Repeat, in
reverse or der , the transpor t bolt removal pr ocedure described in the
“Health & Safety and Installation Guides” .
Impor tant: Not emptying contents from pockets may c ause pump or drain
blockages, or may damage the machine .
Do not wash items which do not have a w ash label, or wash items that are
not intended as machine washable .
DEMO MODE: to deactivate this function, switch the washing machine OFF.
Than press and hold “Start/Pause” button, within 5 seconds press also
“ON/OFF” button and hold both buttons for 2 seconds.