647447
65
Zoom out
Zoom in
Previous page
1/66
Next page
01032013
PROBLEM ANSWER
OVENS
How do I change the door seals?
Please note: the replacement of oven door seals does not require a service technician. Door seals
are easily replaced, please contact your ILVE state office, who will arrange for a replacement to
be sent. If out of warranty please contact the ILVE spare parts department on 02 8569 4666 or
spareparts@eurolinx.com.au
My oven will not turn on
but the clock is illuminated
(digital type clock)
This problem can occur after a power interruption or when the power is first turned on to the
appliance. The display will show an “A” and the clock needs to be reset. This can be done by
pressing both pot buttons (
) simultaneously. The time can be adjusted by pressing the +/-
buttons. For full instructions refer to the operating manual supplied with the appliance or available
on line at www.ilve.com.au
Oven will not turn on
(Analogue type clock)
For the oven to work manually, the hand symbol must be displayed in the little window on clock.
For full instructions refer to the operating manual supplied with the appliance or available on line
at www.ilve.com.au
My oven smokes when turned on
This is a natural occurrence and is caused by the self-clean burning off process. A good tip: leave
the oven on at a high temperature for 10 minutes after removing cooked food. This will burn off
any splatter and prevent the oil from going cold. It will then start to burn off when oven is next
turned on. Please note: all ovens will occasionally require to be dismantled and cleaned internally,
even if self-clean liners are fitted. Do not use oven cleaner on self-clean liners. For full instructions
refer to the operating manual supplied with the appliance or available on line at www.ilve.com.au
My oven gets too hot externally
Check that the correct ventilation has been allowed. See illustrations of ventilation requirements
in the installation book. Please note that being an oven, the external panels will warm up after the
oven has been on for over an hour, at high temperatures. This is normal heat transfer; the panels
can heat up to around 60ºC.
I am unable to remove the light
cover to replace the globe
Cover the glass with e.g. an old tea towel and use multi-grip pliers to lightly grip the cover and
undo it turning anti-clockwise.
The oven light is not working All current model ovens require the function knob to be pushed in/out to turn light on or off.
facebook.com/ILVEappliances
twitter.com/ILVE_appliances
youtube.com/ILVEappliances
livewithilve.com
You can now find us on:
TROUBLESHOOTING
freestanding cookers
65ILVE Operating Manual
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ilve PD100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ilve PD100 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info