10
• To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good
air circulation of the electronic device.
• To guarantee between the work top and the top of the drawer or oven a space of 5 mm
to allow the exit of the air flow.
• If a drawer is placed under the work, avoid to put into this drawer flammable objects
(for example : sprays) or not heat-resistant objects.
• The safety gap between the hob and the cooker hood placed above must respect the
indications of the hood manufacturer. In case of absence of instructions respect a
distance minimum of 760 mm.
• The connection cord should be subjected, after builting, with no mechanical constraint,
such for example of the fact of the drawer.
• The installation of the hob in non stationary sites ( for example : boat ) should be
undertaken by specialists.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carelessly, in conformity of the following drawing.
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).
