504420
4
Zoom out
Zoom in
Previous page
1/18
Next page
1. How to insert a dock adaptor
a. Please use dock adaptor that came with your iPhone or iPod.
b. Using the correct dock adaptor ensures the proper t for your iPhone or iPod.
c. Gently push the dock adaptor down into the universal dock.
d. Carefully place your iPhone or iPod into the universal dock. Your iPhone or iPod must not be
in a case or "Skin".
2. How to remove the dock adaptor
• Remove your iPhone or iPod rst, then carefully remove the dock adaptor.
Installing the Dock Adapter
GETTING STARTEDGETTING STARTED
• This system is designed to operate on AC100V~240V 60/50Hz house current only.
• Connecting this system to any other power source may cause damage to the system and such
damage is not covered by your warranty.
• Main plug is used as the disconnect device, the disconnect device shall remain readily operable.
Power Source
Note: The system has an AC plug and will only t into matching AC outlets. This is a safety feature to reduce the
possibility of electric shock. If the plug will not t in your AC outlets, you should have the outlet changed by a
qualied, licensed electrician. Do not use an adapter to make the plug t into your outlet. This defeats the safety
feature and could expose you to electric shock.
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you
operate the controls. These 'feet' are made from non-migrating rubber material specially formu-
lated to avoid leaving any marks or stains on your furniture. However certain types of oil based
furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften,
and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we
strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores
and home improvement centers everywhere, and apply these pads to the bottom of the rubber
'feet' before you place the product on ne wooden furniture.
Protect your Furniture
iLuv | 6iMM183 | V10M10_IM_EN_090920095 | iLuv
The remote control battery has been previously installed and ready for operation for the rst time
use. When the remote control stops functioning, replace the battery with a new one. To do so,
locate the battery compartment and follow the steps below:
1. Slide out the battery holder from the remote control case.
2. Insert a “CR2025” 3V lithium battery making certain to follow the correct polarity. Observe the
corresponding symbols (+/-).
3. Secure battery and push the battery holder back into the remote control until it is fully inserted.
Installing the Remote Control Battery
This unit operates on 6 X AA batteries (not included) for backup. Please note that batteries are important
because they provide emergency power for the receiver in the event that the AC power fails.
1. Open the Battery Compartment.
2. Insert 6 "AA" size batteries into the Battery Compartment, making sure that the batteries are installed
with the proper polarity (+/-) are maintained.
Important Note: Backup battery is used for Weather band only, if AC power fails and battery operating,
all other iPod, FM, AUX IN functions are unavailable and the MODE button will be invalid.
Notes on battery use:
• To save battery power, please always use AC adaptor for receiver power supply.
• Load new batteries with their polarities (+/-) aligned correctly.
• Do not apply heat to batteries, or internal short circuit may occur.
• If this unit is not to be used for a long period of time, remove all batteries and store them in a cool and dry place.
• Remove spent batteries immediately and dispose of them.
• Do not use old and new batteries together. Also never use an alkaline battery with a magnesium battery.
Backup battery time is approximately 54 hours.
Installing the Backup Batteries
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv iMM183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv iMM183 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info