504408
5
Zoom out
Zoom in
Previous page
1/15
Next page
GETTING STARTED
Location of Indications on the LCD Screen
ALARM 1 / ALARM 2
indicator
iPod mode indicator
FM STEREO
Indicator
Frequency unit
Band / AM-PM
indicator
OPERATIONAL INSTRUCTIONS
The iHD171 is equipped with a Time Sync feature which sets the time and date on the clock of the iHD171
in sync with the docked iPhone or iPod.
1. Press and hold EQ / TIME SYNC Button for approximately two (2) seconds to turn Time Sync function
ON or OFF. TIME SYNC ON” or “TIME SYNC OFF” will temporarily display on the LCD screen for ve (5)
seconds.
2. After the Time Sync function is turned ON, dock your
iPhone or iPod, the unit will start authenti cation and
will sync time/date from docked iPhone or iPod.
3. As Time Sync processes, TIME SYNC” will ash for
approximately two (2) minutes on LCD.
4. If Time Sync is turned ON while your iPhone or iPod is
docked, the iHD171 will automatically synchronize time
and date from the docked iPhone or iPod
Note: Time Sync is compatible with iPhone 3G, iPhone, iPod touch (2nd generation), iPod nano (4th generation),
iPod classic, iPod touch (1st generation), iPod nano (3rd generation), iPod nano (2nd generation), iPod with video, iPod
nano (1st generation).
Using the Time Sync Feature
iLuv | 8iHD171 | V10M10_IM_EN_1030087 | iLuv
RBDS Messages /
Date / FUNCTION
indicator
HD Radio / Signal
Strength indicator
SLEEP Indicator
Time / Frequency
readout
1. Push the connector plug on the end of the antenna wire onto the FM Antenna Connector at the
rear of the radio.
2. Straighten out the Antenna to its full length and orient the wire for the best reception.
Connecting the FM Antenna Wire
Connect the provided Loop Antenna as described below:
1. Connect the 3.5mm plug of AM loop antenna to the AM ANTENNA jack at the rear of the unit.
2. Orient the AM loop antenna for the best reception.
Connecting the AM Loop Antenna
1. Press and hold the TIME SET Button located on the top of the unit until 12H or 24H appears. Select
your desired clock display either 12 hour or 24 hour by turning TUNING Knob (or press I or I on
the remote control). Then press the TIME SET Button again to conrm 12H or 24H mode setting.
2. The hour display at the center will ash. Turn the TUNING Knob (or press I or I on the remote
control) to set the current time, then press the TIME SET Button again to conrm clock setting.
(Note: if the system is set to 12-hour mode, the AM or PM indicator will be lighted on.) The minute
display will now ash. Follow the same procedure to set the minute.
3. The month, date and year display at the lower right will ash successively. Press the TIME SET Button
to accept the current setting, or turn TUNING Knob (or press I or I on the remote control) until
current month, date or year is displayed. Press the TIME SET Button to conrm month, date or year
setting.
Setting the Clock Time and Calendar
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iluv iHD171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iluv iHD171 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info