483557
7
Zoom out
Zoom in
Previous page
1/76
Next page
Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
Normal soil
Crockery and
cutlery
Prewash
Wash 65 °C
Rinses
Dry
100 - 110 1.2 - 1.6 15 - 16
3)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
195 1.02 15
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) This program is indicated for heavy soil loading to get the sufficient cleaning results on the pots and pans.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
Options
Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction and it is not pos-
sible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed. By
default, this acoustic signal is on, but it is
possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Setting
and starting a programme”.
2. Press and hold Program until the pro-
gramme indicator
starts to flash and
the programme indicator
comes on
with fixed light.
3. Press immediately Program.
The programme indicator
comes
on with fixed light.
The programme indicator
starts
to flash.
4.
Wait until the programme indicator
goes off. The programme indicator
continues to flash. The end indicator is
on.
5. Press Program. The end indicator goes
off. The acoustic signal for the end of
programme is deactivated.
6. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to activate acoustic signal for the
end of programme
1. Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (4). The end indicator is off.
ENGLISH 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea LAGAN DW60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea LAGAN DW60 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea LAGAN DW60

Ikea LAGAN DW60 User Manual - Dutch - 22 pages

Ikea LAGAN DW60 Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info