468492
3
Zoom out
Zoom in
Previous page
1/6
Next page
5019 618 33068/A
Assembly - Fig. 1-A-B-C
In order to facilitate installation of the hood and flue support, trace a centre line on the wall between the hob and ceiling (1).
Position the template against the wall (2), then mark and drill the holes where indicated.
Insert two wall plugs with hooks (3).
Hang the hood (4) and adjust the position by turning the adjustment screws on the hooks.
Remove the grease filters (5) and mark the holes for secure fixing (6 – see also Fig. A).
Remove the hood and drill the holes (4 x Ø 8 mm). Insert 4 wall plugs.
Fix the bracket to the wall (Fig. B).
Fix the flue support (7) as close as possible to the ceiling with two screws and wall plugs.
Important! Check that the support is perfectly aligned with the hood: mark “a” on the support should align with the
centre line drawn on the wall.
Rehang the hood on the wall (8).
Fix the hood with 4 screws (8).
Fix the collar to the hood exhaust outlet with two screws (9).
Installing the exhaust pipe (Extractor version)
Warning! The exhaust pipe and clamps are not supplied and must be bought separately.
Connect one end of the exhaust pipe to the collar on the hood with the other end directed to the outside.
Installing the deflector (Filter version)
Fix the deflector (F) to the flue support with 4 screws (see Fig. C).
Connect the deflector to the hood with an exhaust pipe.
Warning! The exhaust pipe and clamps are not supplied and must be bought separately.
Telescopic flue installation
Connect the hood to the power supply (10).
Fix the telescopic flue (11a) to the support (11b) with two screws and let it slide down to its specific seat on the top of the
hood (12).
Fix the bottom section of the flue with two screws from the inside of the hood (13).
INSTALLATION - ASSEMBLY INSTRUCTIONS
FINNL P I GR
E
S
N
DK
D
F
GB
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea FRAMTID HW380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea FRAMTID HW380 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea FRAMTID HW380

Ikea FRAMTID HW380 Installation Guide - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info