779266
5
Zoom out
Zoom in
Previous page
1/176
Next page
5
Getting started:
1. Connect mains cord into AC In (2) connector.
2. A quick press on the knob (1) turn the speaker
On. ENEBY 20/30 starts to search for paired
devices. If a paired device is found, the LED
shines without blinking and your speaker is
ready to use.
3. If no device is found the speaker LED continues
to blink and enters pairing mode automatically.
Go to the Bluetooth settings in your mobile
device and connect to ENEBY 20/30. The LED
should now stop blinking and your speaker is
ready to use. If no music has been playing for
20min, the speaker will enter sleep mode.
Adjust Volume
Turn the knob (1) left to decrease or turn it right to
increase volume level.
Add additional Bluetooth device(s)
(max 8 devices)
1. Make sure no other device is paired and in range
to the speaker.
2. Go to your Bluetooth menu on your mobile
device and connect to ENEBY 20/30.
3. Once Bluetooth connection is established, the
white LED stops blinking.
Unpair Bluetooth device
Go to your Bluetooth menu on your mobile device
and unpair ENEBY 20/30 from your devices.
Play music from external source:
Connect a portable audio device to the AUDIO IN (3)
jack on the rear panel. The speaker automatically
detects the external input and disables Bluetooth
functionality. Use a 3.5mm 3-pol Audio cable for
this feature.
Use speaker throughout home:
ENEBY 20 has the possibility to be portable. ENEBY
battery pack is sold separately.
To insert the battery, open the compartment lid
(5) and insert the battery in the correct direction.
The battery is charging in the product when
mains cord is connected and the speaker is
turned on.
When battery is low a red LED in the knob (1) will
ash. During charging the red LED is on.
Attach Speaker to a wall or a stand:
ENEBY wall mount and ENEBY stand are accessories
and are sold separately.
Use holes (4) and included screws to mount stand
or wall mount. Do not over tighten the screws.
Other Settings
Unpair Bluetooth devices Press and hold the knob (1). Release the knob when the LED light turns
red the rst time.
A conrmation sound will be played.
(Note that on some phone models you also need to remove
ENEBY20/30 from the phone’s paired devices list to be able to pair
again.)
Set up a stereo pair You can pair two identical ENEBY speakers to create a wider stereo
experience. In this conguration, one speaker serves as the left
channel and the other serves as the right channel. On/O and Volume
need to be controlled individually on each speaker.
1. Turn on both speakers.
2. Press and hold the knobs (1) at the same time. Release the knobs
when the LED light turns red the second time.
Wait 2 seconds. A conrmation sound will be played.
3. Press the knob (1) once again on one of the speakers.This speaker is
now assigned as the left channel.
4. Open the Bluetooth setting on your mobile device and connect to
ENEBY speaker for the left channel.
To disable the stereo pair, follow instructions “Unpair Bluetooth
devices” on both speakers.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea 904.575.56 Eneby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea 904.575.56 Eneby in the language / languages: All languages as an attachment in your email.

The manual is 5.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info