783877
1
Zoom out
Zoom in
Previous page
1/5
Next page
Wireless Blood Pressure Wrist Monitor (BP7)
QUICK START GUIDE
Thanks for your purchase. This Quick Start Guide tells you how
to set up your iOS device, connect to Bluetooth, and measure
your blood pressure. Please follow the instruction below to start
your measurement process.
First Time Set Up Instructions
Download the Free iHealth MyVitals App
Prior to first use, download and install
"iHealth MyVitals" from the App Store.
Account Set Up and Registration
Follow the on-screen instructions to register and set up your
personal account.
Charge Battery Prior First Time Use
Connect the monitor to a USB port using
the charging cable provided until the green
indicator light stabilizes.
Connect to iOS Device via Bluetooth
• Apply the cuff or press the START/STOP button, the Bluetooth
indicator will begin flashing.
• Turn Bluetooth "On" under the "Settings" Menu on the iOS
device.
Wait until the model name printed on the monitor, (i.e. "BP7
xxxxxx") and "Not Paired" appear in the Bluetooth menu, and
select the model name "BP7 xxxxxx" to pair and connect. The
Bluetooth indicator will remain steady upon successful
connection. When using the monitor for the first time, it may take
up to 30 seconds for your iOS device to detect the Bluetooth
signal.
• Each subsequent time you use the monitor, "Not Connected" will
be displayed next to "BP7 xxxxxx" in the Bluetooth Menu.
• Please repeat these steps when you switch to another iOS
device with the monitor.
Measurement Procedures
Blood pressure can be affected by the position of the cuff and
your physiologic condition. It is very important that you keep your
wrist at heart level.
1. Be seated with your feet flat on the floor without crossing your
legs. Stay still during measurement. Do not move your wrist,
body, or the monitor.
2. Place your hand palm-side up in front of you and wrap the cuff
around a bare wrist 1/2" (1-2cm) above the wrist joint. If the
monitor is
correctly placed, iHealth logo will be facing upright.
3. The middle of the cuff should be at the level of the right atrium
of your heart.
Waiting to connect Flashing blue light
Connected and measuring Steady blue light
Measurement completed and
ready to disconnect
Gradually extinguishing light
Monitor Status
Bluetooth Indicator
EN
4. It is advised to place the monitor’s travel case under your arm
for support and to keep your arm at optimal height for measure
ment.
5. Adjust the height of your wrist, the App will detect your wrist
position and the measurement will start ONLY when the correct
position is detected. Follow the on-screen instructions to begin
measurement.
Auto Connect Option
Auto connect option allows the monitor to find the last used iOS
device and re-establish the connection with your iOS device
automatically. Auto connect option can be enabled in the App.
(Device Setting->Auto Connect->On)
Taking Measurements with Multiple iOS Devices
Turn off the Bluetooth on the last used iOS device if the Auto
Connect option is enabled in your App, then follow the set up
instructions in the Quick Start Guide.
Measuring without an iOS Device
Enable the Offline Measurement function on the App. (Device
Setting->Offline Measurement->On) Apply the cuff, follow the
measurement Procedures, and then press the "START/STOP"
button to begin measurement. All offline measurements will be
uploaded to the App automatically upon the next successful
Bluetooth connection.
For detailed operating instructions, please visit
www.ihealthlabs.com.
Note: Physical activity including eating, drinking, and smoking as
well as excitement, stress,and many other factors influence blood
pressure results.
ATTENTION: You can stop the measurement process at any time
by pressing and holding the "START/STOP" button for 2 seconds.
Visit www.ihealthlabs.com to obtain additional product
information. For Customer Service, please call
+1-855-816-7705.
iHealth
1/2" (1-2cm)
iHealth
START
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for iHealth BP7 - Sense at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of iHealth BP7 - Sense in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of iHealth BP7 - Sense

iHealth BP7 - Sense User Manual - English - 24 pages

iHealth BP7 - Sense User Manual - German - 14 pages

iHealth BP7 - Sense Quick start guide - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info