311703
10
Zoom out
Zoom in
Previous page
1/13
Next page
64
Laundry with heavy stains may be
PRE-BLEACHED in the machine prior to carrying
out a normal wash programme. Proceed by
diluting the bleach in approximately 1l water
outside of the washing machine in a small
container.
For a machine with temperature selector:
Turn the programme selector to programme4.
Turn the temperature selector to Min.
Warning: Bleaching is only possible in a cold
wash, otherwise your laundry and your appliance
will be damaged.
For a machine without temperature selector:
Turn the programme selector to programme5.
Press the special option button “cold wash”
(ifavailable).
Warning: Bleaching is only possible in a cold
wash, otherwise your laundry and your appliance
will be damaged.
Poor the diluted bleach into chamber and start
the machine.
After this prebleach wash, do a normal wash, in
which more not bleachable laundry can be added.
Add detergent into chamber and start a wash
programme. For this subsequent wash a lower
temperature wash programme (for example 40°C)
can be sufficient because of the pre-bleach
treatment. In this way energy can be saved.
Note:
Bleach should only be used with bleachable
fabrics.
Commercially available products usually consist
of a dye colour, fixing agent and salt.
Pour the dye colour, fixing agent and salt directly
into the empty drum, and only then load the
laundry.
Only use products designed for use in
washing machines.
Follow the manufacturer’s instructions.
Plastic and rubber components of the
machine can be stained by dyes.
WHEN TO REMOVE THE FILTER
Check and clean the filter at least 2 or 3 times
a year.
When the appliance does not drain or spin
properly.
When the pump is blocked by an object
(buttons, coins, safety pins).
Important: Make sure that the water has
cooled before draining.
REMOVING THE FILTER
1. Switch off the appliance.
Open the filter cover with a coin
3. Place a tray or container beneath the cover.
Slowly turn the filter anticlockwise without
unscrewing it completely.
5. Wait until all the water has drained off.
Now unscrew the filter completely and
remove it.
7. Remove any foreign material from the filter.
8. Check that the pump rotor moves freely.
9. Insert the filter and screw it in clockwise until
it locks.
10. Pour 1/2 litre of water into the detergent
drawer and check that water does not leak
from the filter.
11. Close the cover.
LIQUID BLEACH (HYPOCHLORITE)
DYEING
REMOVING THE FILTER
2.
4.
6.
2
4
6
00003gb.fm5 Page 64 Wednesday, May 10, 2000 5:12 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awv 616 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awv 616 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awv 616

Ignis awv 616 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info