304600
14
Zoom out
Zoom in
Previous page
1/17
Next page
32
INSTALLATION
Remove the transit bolts
1.
Slacken the four bolts with the spanner supplied.
2.
Unscrew the bolts by hand.
3.
Holding the bolt head, pull each bolt through the wide
part of the holes.
4.
Close the holes with the plastic covers supplied; insert
the covers in the wide part of the hole and slide them
toward the narrow part until they click into place.
5.
Keep the transit bolts for future use.
Whenever the appliance is transported, the transit bolts
must be refitted:
1.
Pry off the plastic covers with a screwdriver, slide them
in the opposite direction of the arrow and remove.
2.
Insert the transit bolts, performing the steps for removal
in reverse order.
Adjust the feet
If the floor is uneven, adjust the levelling feet as required
(do not insert pieces of wood etc. under the feet):
1.
Slacken the locknut using the spanner supplied.
2.
Adjust the height of the foot, turning it by hand.
3.
Tighten the locknut by turning it anti-clockwise towards
the appliance casing.
If the appliance is to be installed on a wooden floor,
distribute the weight by placing it on a 60 x 60 cm sheet of
plywood at least 3 cm in thickness.
Secure the plywood sheet to the floor.
50110078GB.fm Page 32 Tuesday, January 11, 2005 5:28 PM
Black process 45.0° 100.0 LPI
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awv 094 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awv 094 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awv 094

Ignis awv 094 User Manual - German - 16 pages

Ignis awv 094 Quick start guide - Dutch - 2 pages

Ignis awv 094 User Manual - Dutch - 16 pages

Ignis awv 094 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info