311700
14
Zoom out
Zoom in
Previous page
1/17
Next page
31
WATER SUPPLY
Water supply: only cold water.
Tap: 3/4 threaded hose connector.
Water pressure (mains pressure):
10-100 N/cm
2
(1-10 bar).
For Great Britain and Ireland only
Water inlet: hot and cold fill. The warm water inlet
temperature must not exceed 60°C.
INLET HOSE(S)
Note:
If the inlet hose is already fitted to the rear panel
on the appliance, ignore points 1 and 4.
1.
Remove the inlet hose from the drum.
2.
Fit the mesh filter supplied in the thread between
the straight end of the inlet hose(s) and the tap(s).
3.
Carefully screw the straight end of the inlet hose(s)
to the tap(s) by hand.
4.
Screw the curved end of the hose to the appliance
taking care that the hose is not kinked.
5.
Turn the tap(s) on fully and check that the joints at
the washing machine and the tap(s) are watertight.
If the hose is not long enough, replace it with a
suitable length of pressure-resistant hose
(approved under EN 500 65 to withstand a
minimum of 10 bar).
Check the hose regularly for brittleness and cracks
and replace if necessary.
The washing machine may be connected without a
non-return valve.
Observe any special local regulations regarding
connection to the water supply.
INSTALLATION INSTRUCTIONS
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awp 202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awp 202 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awp 202

Ignis awp 202 User Manual - German - 15 pages

Ignis awp 202 User Manual - Dutch - 15 pages

Ignis awp 202 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info