70496
11
Zoom out
Zoom in
Previous page
1/14
Next page
GB 11
Description of red indications
Red indication
lights up
Description
Causes
Solutions
“Water tap closed”
Appliance has no or insufficient water supply. The
“Start/Pause”
light blinks.
Check whether:
Water tap is fully open and water supply pressure is sufficient.
Kinks are present in the water inlet hose.
Mesh filter of water supply hose is blocked (see “Care And Maintenance”.
The water hose is frozen up.
The safety valve inspection window of your water supply hose is red
(provided your appliance has a water supply hose as shown on picture
“B”
-
see previous chapter “Care And Maintenance”); replace the hose by a new
one available through our After-Sales Service or your specialist dealer.
After problem has been removed, restart programme by pressing
“Start/Pause”
.
If the fault occurs again, contact our After-Sales Service (see next chapter).
“Clean pump”
Waste water is not pumped out. The appliance stops in the corresponding
programme step; unplug it and check whether:
Kinks are present in the drain hose, or the hose is blocked for another
reason.
Filter or pump is blocked (see chapter “Removing The Filter/ Draining
Residual Water”;
make sure the water has cooled before draining
the appliance).
The drain hose is frozen up.
After problem has been removed, select and start the “Drain” programme
or push the “Reset” button for at least 3 seconds; afterwards restart the
desired programme. If the fault occurs again, contact our After-Sales-
Service (see next chapter).
IFU Delta-Domino_LR-HR-STEAM-GB NEW.fm Page 11 Monday, September 15, 2008 3:59 PM
Black process 45.0° 100.0 LPI
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis AWP 094 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis AWP 094 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis AWP 094

Ignis AWP 094 Quick start guide - English - 2 pages

Ignis AWP 094 Quick start guide - German - 2 pages

Ignis AWP 094 User Manual - German - 13 pages

Ignis AWP 094 Quick start guide - Dutch - 2 pages

Ignis AWP 094 User Manual - Dutch - 13 pages

Ignis AWP 094 Quick start guide - French - 2 pages

Ignis AWP 094 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info