304044
13
Zoom out
Zoom in
Previous page
1/15
Next page
30
INSTALLATION
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
Make sure that all four feet are resting firmly on
the floor and check that the appliance is perfectly
level (use a spirit level).
If the floor is uneven adjust the front right levelling
foot as requested.
Slacken the locknut using the spanner supplied.
Adjust the height of the foot, turning it by hand.
Tighten the locknut anticlockwise towards the
washing machine.
If the appliance is to be installed on a wooden floor,
distribute the weight by placing it on a 60 60 cm
sheet of plywood at least 3 cm in thickness. Secure
the plywood sheet to the floor.
BUILD-UNDER / WORKTOP
The appliance must be installed only under a
fitted, continuous kitchen worktop.
The appliance must only be built under using the
built under set UBS.
Unplug the appliance from the mains.
Unscrew the worktop fixing screws from the rear
of the appliance.
Slide the worktop fully backward and lift it
upwards to remove.
Install the cover panel following the relative
instructions.
Refit the fixing screws and tighten them.
BUILD-UNDER OPENING DIMENSIONS
Width 600 mm
Height 825 mm
Depth 600 mm
WARNING:
Only plug the machine into the mains power socket
after you have fitted the cover panel or the machine
worktop.
INSTALLATION INSTRUCTIONS
1.
2.
3.
1.
2.
3.
1
2
3
3
1
2
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awp 091 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awp 091 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awp 091

Ignis awp 091 Quick start guide - German - 15 pages

Ignis awp 091 User Manual - Dutch - 15 pages

Ignis awp 091 Quick start guide - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info