611545
8
Zoom out
Zoom in
Previous page
1/9
Next page
18
When delivered from the factory the vent hose
with an adaptor is in the drum.
N.B.:
When vent hose is not supplied it is
recommended to use the kit AMH 577 which is
available from your dealer
Vent hose mounting
1.
Place a towel or the packaging beside the
dryer.
2.
Lay the dryer down on the right side on the
towel or packaging (from the front).
3.
Push the adaptor inside the hose (see
diagram). Mount the vent hose with adaptor
on the connecting branch below the dryer.
Ventilation to the outside
Position the vent hose to the outside without
sharp bends (internal diameter 10 cm,
maximum length with 2 elbows: 3m).
When stacking on a washing machine ensure
that the hose is horizontal or vertical. The
vent hose should not sag down.
Do not mount any filter on the end of the
hose. The filter could block, reducing the
performance of your dryer.
Do not connect the vent hose to the heating
system.
Use only outlets insulated from the damp.
Without vent hose
Use the dryer in large well ventilated room.
Keep the room free of dust.
The minimum distance from the air opening
to the wall must be at least 10 cm.
To change the direction of opening of the
door
1.
Unplug the dryer.
2.
Open the door.
3.
Remove the contact pin at the upper part of
the door with a spanner. Turn the contact pin
90° and take it out.
4.
Unscrew the 2 screws at the door hinge and
remove the door.
5.
Unscrew the 2 screws above and below the
door lock system.
6.
To remove the door lock:
Press the hook at the upper part down with a
screwdriver, pull it forward and take the lock
system out.
7.
To change the door opening:
Turn the door.
Re-fit the door with the 2 screws at the
preferred position.
Hang the door lock system at the opposite
side of the door and latch it.
Fix the 2 screws above and below the door
lock system.
8.
Replace the contact pin in the top of the door.
VENT CONNECTION
DOOR REVERSIBILITY
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis AWL 205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis AWL 205 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis AWL 205

Ignis AWL 205 User Manual - German - 8 pages

Ignis AWL 205 User Manual - Dutch - 8 pages

Ignis AWL 205 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info