76818
2
Zoom out
Zoom in
Previous page
1/8
Next page
GB
-2-
First time use
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
In order to always ensure the best cleaning
results, you NEED to set:
DETERGENT type and WATER HARDNESS.
1.
Select 3rd programme
(see Table of programmes
- page 1)
2.
Press START button
for 7 seconds
3a.
Check your
detergent type...
3b.
...and set it on your dishwasher
using the START button
(as per table below)
4.
Remember to use salt and rinse
aid when needed (as indicated
below)
5.
Switch off and switch on
again to save setting
Detergent
types
Dishwasher models
model without
display
model with display
Powder or gel
(factory setting)
no symbol add salt add rinse aid
Tablet 2 in 1
add salt
Tablet 3 in 1
Tablet All in 1
For models without “detergent type” option, the salt and rinse aid indicators will be lit when tablets are used.
3h 6h 9h
rinse aid
salt
rinse aid
1.
Ask your water supply company what
the
water hardness
is...
2.
...enter this value on your dishwasher
Suggestions for detergent use
English
degrees °eH
Water
hardness
Dishwasher with
display: insert value
in the display
Dishwasher without
display: count
START button led
flashes
Gel or Powder
(rinse aid and salt)
Tab le ts
0 - 6.3 Soft 1 1x
go to step 1
(see “Daily check”)
if extra salt is
needed go to step 1
(see “Daily check”)
7 - 12.6 Medium 2 2x
13.3 - 18.9 Average 3 3x
19.6 - 25.9 Medium-hard 4 4x
26.6 - 35 Hard 5 5x
35.7 - 44.1 Very hard 6 6x
44.8 - 74.9 Extremely hard 7 7x
How to set water hardness
*
only
before the first wash
or if the
water hardness has been changed
Switch on the appliance
- Select the 2nd programme “P2” - consult the table of programmes.
- Press the START button for at least 5 seconds until the START indicator lamp flashes.
- The water hardness setting is shown on the display (if present) or the START button flashes.
- With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again.
- The appliance must be switched off to memorise the new setting.
Even if you use tablets which include salt,
you must still add salt since such
detergents are not effective enough at
softening hard water.
Water hardness level is factory set for
medium hard water (a number “4” is
shown on the display or the START
indicator lamp flashes 4 times).
How to set detergent type: powder/gel/tablet (if option is available)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis ADL 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis ADL 350 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis ADL 350

Ignis ADL 350 User Manual - German - 9 pages

Ignis ADL 350 Quick start guide - Dutch - 4 pages

Ignis ADL 350 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info