647107
1
Zoom out
Zoom in
Previous page
1/6
Next page
FTB12000JS
Multi-Function Jump Starter
USER MANUAL
• Get to know your device
• Features
1. In case a car battery cannot start the car, this device can play the role
of emergency ignition.
2. High capacity of 12000mAh.
3. Built-in LED light and SOS signal function.
4. Power bank for laptops (19 V), tablet PCs (5V), MP3 / MP4,
mobile phones, portable game consoles etc.
5. Multiple safety protection system to ensure, devices' safety: protection
against overcharge, overvoltage, overcurrent and short circuit.
6. Small size, light weight, easy storage. The device is much more easy
to use compared to traditional electric cable.
• Specications
Battery Type:
Li-polymer
Battery Capacity:
12000mAh/44.4Wh
Input:
DC 19V/2A
Output:
DC 12V (for car)
DC 19V
USB 5V
Peak current:
200A
Size:
163 x 87 x 37.3mm
Weight:
500g
• Buttons
1. Power on/o
Short press Power button to turn the charge indicator on/o.
Note: The device will turn o automatically after 90 seconds of no-load.
2. “Flashlight” on/o
1) Long press Power key (3 sec) to turn ashlight on.
2) Repeat long press Power key (3 sec) to turn ashlight o.
3. “Lamp/SOS” on/o
1) Press shortly Lamp button to turn on rst level of brightness of
the lamp (maximum).
2) If this button is pressed again within 5 seconds, the second level
of brightness will turn on (medium).
3) Triple continuous pressing Lamp button starts the third level of
brightness (minimum).
4) To turn the lamp o, wait for 5 seconds, and then shortly press
Lamp button.
4. SOS signal on/o
1) Long press the Lamp button (3 sec) to turn SOS signal on.
2) Long press the Lamp button (3 sec) to turn SOS signal o.
• Car start
(Applied only to 12 V car battery)
1. Connect red clamp «+» to the positive contact of the car battery,
then connect black clamp «-» to the negative contact.
2. Connect mini Jumper clamps to the FTB12000JS 12V out.
(Disconnect the car battery if it is completely discharged).
3. Start up the ignition. According to experience, if engine doesn't
start after 3-5 seconds, please wait for 1 minute, and then repeat starting.
4. Disconnect mini Jumper clamps from the FTB12000JS.
5. Disconnect mini Jumper clamps from the car battery.
Charge your mobile phone:
1. Use original or standard USB cable to connect the device.
Charge your laptop or other devices (19V):
1. Choose the correct connector for laptop DC input port (19V).
2. Connect the power bank to laptop using the DC cable.
Warning:
Never allow red and black clamps to touch each other or another
common metal conductor — this could cause damage to the unit
and/or create a sparkling/explosion hazard
The product should be stored at temperatures above freezing to
prevent damage
• The unit is suitable for engine start up to 3 liters
This system is designed to be used only on vehicles with a 12 V battery
system; do not connect to a 6 V or 24 V battery system
It is necessary to disconnect the jump starter from the car battery
within 30 seconds after engine start
Do not disassemble the device yourself. It may be dangerous
Keep the device in dry place. Do not expose it to high temperatures
Please fully charge the power bank at rst usage
Keep the power bank away from children
Please make a complete charge every four month to avoid shortening
life span
• Accessories:
1. AC Adapter
2. DC Cable
3. USB Cable
4. Battery clip
5. Notebook connectors
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iconbit FTB12000JS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iconbit FTB12000JS in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info