12678

Icom IC-M801E Manual

3
Zoom out
Zoom in
Previous page
1/80
Next page
2001 NEW
ii
When your ship requires assistance, contact other ships and the Coast Guard by sending a distress call using dig-
ital selective calling on an emergency frequency.
IN CASE OF EMERGENCY
When immediate help is needed
q Push and hold [DISTRESS] for 5 sec. until the
short beeps become one long beep, to send the
distress call.
w After 8291 kHz is automatically selected (after an
acknowledgement call is received), push and hold
the PTT switch on the handset or microphone and
send the following information.
1. “MAY DAY, MAY DAY, MAY DAY.”
2. “THIS IS……………” (name of ship)
3. “LOCATED AT ……” (ship’s position)
4. Give the reason for the distress call.
5. Explain what assistance you need.
6. Give additional information:
• Ship type
• Ship length
• Ship color
• Number of people on-board
When potential problems exist
q Push [DSC] to select DSC watch mode, if neces-
sary.
w Push [MODE
SET
] to select DSC menu, rotate [CH]
to select “Geographical” then push [ENT].
e Follow the guidance displayed on the LCD (bottom
line), to set up the category, area, traffic and call-
ing frequencies with [CH], [ENT] and keypad.
r Push and hold [CALL] for 1 sec. until the short
beeps become one long beep.
t Transmit the appropriate information using voice.
• DSC equipped ships may monitor your transmission.
FOREWORD................................................i
IMPORTANT .............................................. i
EXPLICIT DEFINITIONS ........................... i
PRECAUTIONS ......................................... i
IN CASE OF EMERGENCY ......................ii
TABLE OF CONTENTS ............................ ii
QUICK REFERENCE............................. I–V
■ How to set a Channel/Group .............. I
■ Audio output/squelch adjustment ...... II
■ Basic voice transmission and
reception ........................................... III
■ Receiving a DSC............................... IV
■ Transmitting a distress call................ IV
1 OPERATING RULES AND
GUIDELINES......................................... 1
2 PANEL DESCRIPTION .................... 2–7
■ Controller (RC-25E) ........................... 2
■ Main unit............................................. 4
■ Handset (HS-98) ............................... 5
■ LCD screen ....................................... 6
3 SELECTING A CHANNEL/FREQUENCY
........................................................... 8–9
■ Selecting a channel ........................... 8
4 RECEIVE AND TRANSMIT .......... 10–12
■ Basic voice transmit and receive .... 10
■ Function for transmit ........................ 10
■ Functions for receive ....................... 11
■ FSK operation ................................. 12
5 CHANNEL NAME PROGRAMMING . 13
6 DSC PREPARATION ................... 14–15
■ MMSI code programming ................ 14
■ Position and time programming ....... 15
7 CALL PROCEDURE .................... 16–28
■ Distress call ..................................... 16
■ Individual call ................................... 20
■ Group call ........................................ 23
■ Geographical call ............................. 24
■ Semi/Auto (telephone) call .............. 26
■ Test call ........................................... 28
8 WHEN RECEIVING A CALL ........ 29–36
■ To receive a DSC call ...................... 29
■ Received information ....................... 30
■ Deleting a memory .......................... 30
■ Distress call ..................................... 31
■ Distress relay call ............................ 33
■ Semi/Auto (telephone) call .............. 34
■ Group call ........................................ 35
■ Geographical area call .................... 35
■ Individual call ................................... 36
9 MEMORY OPERATION ..................... 37
■ Memory description ......................... 37
■ Memory writing ................................ 37
■ Memory reading/transmitting/deleting
......................................................... 37
10 DSC MENU OPERATION ............ 38–41
■ General ............................................ 38
■ ID input ............................................ 38
■ Frequency input ............................... 39
■ Verifying self-ID ............................... 40
■ Self testing ....................................... 40
■ Telephone number input .................. 40
■ Memory reading/deleting ................. 41
■ Printing out the DSC memory contents
......................................................... 41
11 SET MODE ................................... 42–47
■ Quick set mode ............................... 42
■ Initial set mode ................................ 43
12 CONNECTION AND INSTALLATION
....................................................... 48–60
■ Supplied accessories ...................... 48
■ Basic connections ............................49
■ Advanced connections .................... 50
■ Ground connection .......................... 51
■ Power source .................................. 52
■ Antenna ........................................... 52
■ Mounting .......................................... 53
■ Using the optional MB-108 .............. 55
■ Using the optional MB-75 ................ 56
■ Transceiver dimensions ................... 57
■ Fuse replacement ............................ 58
■ Connector information ..................... 59
13 FREQUENCY PROGRAMMING .. 61–62
■ Frequency selection ........................ 61
■ Programming a frequency ............... 62
14 SPECIFICATIONS .............................. 63
15 OPTIONS ........................................... 64
16 TEMPLATE .................................. 65–68
■ Remote controller (RC-25E) ............ 65
■ Speaker (SP-24E) ........................... 67
ABOUT CE ............................................. 69
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Quick Reference
IC-M801E_0.qxd 05.12.2 16:32 Page c
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M801E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M801E in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info