522358
32
Zoom out
Zoom in
Previous page
1/36
Next page
26
TROUBLESHOOTING
10
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does not turn
ON.
The battery is exhausted.
The battery pack is not attached cor-
rectly.
• Recharge the battery pack.
• Attach the battery pack correctly.
p. 23
p. 3
No sound from speaker. The squelch level is too high.
Volume level is too low.
• Speaker has been exposed to water.
• Set the squelch level to the threshold level.
Adjust the audio level to a suitable level.
• Drain water from the speaker.
p. 12
p. 11
p. 13
Transmitting is impossible,
or high power can not be se-
lected.
Some channels are for low power or re-
ceive only.
The battery is exhausted.
The battery is over charged.
The output power is set to low.
• Change channels.
• Recharge the battery pack.
Make sure the battery voltage is correct.
• Push [Hi/Lo
] to select high power.
pgs. 8,
9, 27
p. 23
p. 10
The displayed channel cannot
be changed.
• Lock function is activated. Push and hold [Hi/Lo
] for 1 sec. to
cancel the function.
p. 13
Scan does not start. “TAG” channels are not programmed.
Set the desired channels as “TAG” chan-
nels.
p. 15
No beep emits. • Beep tone function is turned OFF. Set the beep tone to ON (Fix Beep/User
Beep) in the set mode.
p. 18
Battery voltage error. The connected battery pack’s voltage is
more than 11 V.
Make sure the battery voltage is correct.
The noise cancellation does
not work.
The sub-microphone is covered with
something.
An optional external speaker-micro-
phone is connected.
Make sure the sub-microphone is not
covered.
Disconnect the microphone.
p. 4
p. 25
The noise detection function
does not work.
The sub-microphone is covered with
something.
The squelch is open.
Make sure the sub-microphone is not
covered.
Set the squelch level to the desired level.
p. 4
p. 12
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-M35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-M35 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info