Manual Icom IC-FR9020 (page 3 of 20) (English)

670412

Zoom out

Zoom in

1/20

Icom, Icom Inc, and the Icom logo are registered trademarks of

Icom Incorporated (Japan) in Japan, the United States, the United

Kingdom, Germany, France, Spain, Russia and/or other coun-

tries.

All other products or brands are registered trademarks or trade-

marks of their respective holders.

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electro-

magnetic energy during transmit mode.

This radio is designed for and classiﬁed

as “Occupational Use Only”, meaning it

must be used only during the course of

employment by individuals aware of the hazards,

and the ways to minimize such hazards. This radio

is NOT intended for use by the “General Popula-

tion” in an uncontrolled environment.

This radio has been tested and complies with the FCC

and IC RF exposure limits for “Occupational Use Only”.

In addition, your Icom radio complies with the follow-

ing Standards and Guidelines with regard to RF energy

and electromagnetic energy levels and evaluation of

such levels for exposure to humans:

• FCC OET Bulletin 65 Edition 97-01 Supplement C,

Evaluating Compliance with FCC Guidelines for

Human Exposure to Radio Frequency Electromag-

netic Fields.

• American National Standards Institute (C95.1-1992),

IEEE Standard for Safety Levels with Respect to

Human Exposure to Radio Frequency Electromag-

netic Fields, 3 kHz to 300 GHz.

• American National Standards Institute (C95.3-1992),

IEEE Recommended Practice for the Measurement

of Potentially Hazardous Electromagnetic Fields– RF

and Microwave.

To ensure that your expose to RF elec-

tromagnetic energy is within the FCC

and IC allowable limits for occupation-

al use, always adhere to the following

guidelines:

• DO NOT operate the radio without a proper antenna

attached, as this may damaged the radio and may

also cause you to exceed FCC and IC RF exposure

limits. A proper antenna is the antenna supplied with

this radio by the manufacturer or antenna speciﬁ-

cally authorized by the manufacturer for use with this

radio.

• DO NOT transmit for more than 50% of total radio

use time (“50% duty cycle”). Transmitting more than

50% of the time can cause FCC and IC RF expo-sure

compliance requirements to be exceeded.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF

energy that can possibly cause interference with other

devices or systems. To avoid such interference, turn

off the radio in areas where signs are posted to do so.

DO NOT operate the transmitter in areas that are sen-

sitive to electromagnetic radiation such as hospitals,

aircraft, and blasting sites.

Occupational/Controlled Use

The radio transmitter is used in situations in which per-

sons are exposed as consequence of their employment

provided those persons are fully aware of the potential

for exposure and can exercise control over their expo-

sure.

NOTICE: The AMBE + 2 ™ voice coding Technology

embodied in this product is protected by intellectual

property rights including patent rights, copyrights and

trade secrets of Digital Voice Systems, Inc. This voice

coding Technology is licensed solely for use within this

Communications Equipment. The user of this Technol-

ogies explicitly prohibited from attempting to extract,

remove, decompile, reverse engineer or disassemble

the Object Code, or in any other way convert the Ob-

ject Code into a human readable form. U.S. Patents

Nos #5,870,405, #5,826,222, #5,754,974, #5,701,390,

#5,715,365, #5,649,050, #5,630,011, #5,581,656,

#5,517,511, #5,491,772, #5,247,579, #5,226,084 and

#5,195,166.

• FOR CLASS A UNINTENTIONAL RADIATORS

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial

environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual,

may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

WARNING

CAUTION

FCC INFORMATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-FR9020 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-FR9020 Manual

Product: