670469

Icom IC-F29DR Manual

5
Zoom out
Zoom in
Previous page
1/23
Next page
3
Section 2
PROGRAMMABLE KEY FUNCTIONS
Programmable key functions
You can assign the functions described below to [Top],
[Upper], and [Lower] by using the CS-F29DR cloning
software (purchase separately).
Ask your dealer for details.
Null
➥ No function is assigned.
ZONE
➥ Push to toggle the operating Zone.
 •Eachtimetheuserpushesthiskey,thetransceiver
selects Zone 1, Zone 2, and then Zone 1 again.
SCAN
➥ Push to start or pause a scan.
 •WhenascanisstartedwiththePowerONScanorthe
Automatic scan function, push this key to pause the
scan. The paused scan resumes after a set time period.
➥ Hold down this key while a scan is paused, and
then the channel is removed from the scan group.
 •Theremovedchannelisautomaticallyaddedtothe
scan group again, after the scan is canceled.
MONI
➥ While holding down this key, the C.Tone* mute
is released, even if the received signal does not
include a matching C.Tone*.
* CTCSS tone or DTCS code
LOCK
➥ Hold down to turn the Key Lock function ON or
OFF.
 •EvenwhentheKeyLockfunctionisON,[PTT],[MONI],
[LOCK], [CALL], [CLEAR], [SURVEILLANCE], and
[SIREN] are not locked.
CALL // only on a Digital channel //
➥ Push to make a call that includes a Common ID.
CLEAR // only on a Digital channel //
➥ Pushtonishacommunicationbysendingaclear
down signal. After the other station receives the
clear down signal, the transceiver automatically
enters to the Stand-by mode.
BREAK // only on a Digital channel //
➥ Hold down to send a Break-in request call.
 •TheBreak-inrequestcallannouncestotheother
stations on the channel that the user wants to break into
the current communication in the group. The transceiver
waits for the current communication to end. After the
communication ends, the transceiver automatically
sends the call.
➥ While waiting, push this key to cancel the Break-in
request call.
S-RING/C-RING
// only on an Analog channel //
➥ Push to make a Smart-Ring call.
// on both an Analog and a Digital channel //
➥ Hold down to make a Call-Ring call.
NOTE: See the instruction manual that comes with
the transceiver for the default settings of these keys.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
[PTT]
[Top]
NOTE:
Select the channels to be scanned by using
CS-F29DR cloning software.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-F29DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-F29DR in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info