12316
2
Zoom out
Zoom in
Previous page
1/75
Next page
EXPLICIT DEFINITIONS
PRECAUTIONS
IMPORTANT
RReeaadd tthhiiss iinnssttrruuccttiioonn mmaannuuaall ccaarreeffuullllyy
before attempting to operate the transceiver.
SSaavvee tthhiiss iinnssttrruuccttiioonn mmaannuuaall..
This instruction
manual contains important safety and operating
instructions for the IC-706MKIIG.
R
WWAARRNNIINNGG HHIIGGHH VVOOLLTTAAGGEE!! NNEEVVEERR
attach an antenna or internal antenna connector dur-
ing transmission. This may result in an electrical shock
or burn.
R
NNEEVVEERR
apply AC to the [DC13.8V] socket on the
transceiver rear panel. This could cause a fire or ruin
the transceiver.
R
NNEEVVEERR
apply more than 16 V DC, such as a 24 V
battery, to the [DC13.8V] socket on the transceiver
rear panel. This could cause a fire or ruin the transceiv-
er.
R
NNEEVVEERR
let metal, wire or other objects touch any
internal part or connectors on the rear panel of the
transceiver. This will cause electric shock.
R
NNEEVVEERR
expose the transceiver to rain, snow or
any liquids.
NNEEVVEERR
allow children to play with the transceiver.
AAVVOOIIDD
using or placing the transceiver in areas with
temperatures below –10°C (+14°F) or above +60°C
(+140°F). Be aware that temperatures on a vehicle’s
dashboard can exceed 80°C, resulting in permanent
damage to the transceivers front panel if left there for
extended periods.
AAVVOOIIDD
placing the transceiver in excessively dusty
environments or in direct sunlight.
AAVVOOIIDD
placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.
During mobile operation,
DDOO NNOOTT
operate the trans-
ceiver without running the vehicle’s engine. When
transceiver power is ON and your vehicle’s engine is
OFF, the vehicle’s battery will soon become exhausted.
Make sure the transceiver power is OFF before start-
ing the vehicle. This will avoid possible damage to the
transceiver by ignition voltage spikes.
During maritime mobile operation, keep the transceiv-
er and microphone as far away as possible from the
magnetic navigation compass to prevent erroneous
indications.
BBEE CCAARREEFFUULL!!
The heatsink will become hot when
operating the transceiver continuously for long peri-
ods.
BBEE CCAARREEFFUULL!!
If a linear amplifier is connected, set
the transceivers RF output power to less than the lin-
ear amplifiers maximum input level, otherwise, the lin-
ear amplifier will be damaged.
Use Icom microphones only (supplied or optional).
Other manufacturers microphones have different pin
assignments and connection to the IC-706MKIIG may
damage the transceiver.
Beat signals may be heard on some frequencies.
These will occur as a result of circuit construction.
For U.S.A. only
CCaauuttiioonn::
Changes or modifications to this transceiver, not
expressly approved by Icom Inc., could void your authority
to operate this transceiver under FCC regulations.
i
The explicit definitions described below apply to this
instruction manual.
WWOORRDD DDEEFFIINNIITTIIOONN
R
WWAARRNNIINNGG
Personal injury, fire hazard or electric
shock may occur.
CCAAUUTTIIOONN
Equipment damage may occur.
NNOOTTEE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
IC-706MKIIG.qxd 02.3.27 13:53 Page i
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-706MKIIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-706MKIIG in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info