Manual Icom IC- F3260 Series (page 37 of 40) (English)

670335

Zoom out

Zoom in

1/40

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electromagnetic en-

ergy during transmit mode. This radio is designed for

and classiﬁed as “Occupational Use Only,” meaning it

must be used only during the course of employment

by individuals aware of the hazards, and the ways to

minimize such hazards. This radio is NOT intended for

use by the “General Population” in an uncontrolled environment.

This radio has been tested and complies with the FCC RF expo-

sure limits for “Occupational Use Only.” In addition, your Icom radio

complies with the following Standards and Guidelines with regard to

RF energy and electromagnetic energy levels and evaluation of such

levels for exposure to humans:

• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating

Compliance with FCC Guidelines for Human Exposure to Radio

Frequency Electromagnetic Fields.

• American National Standards Institute (C95.1-1992), IEEE

Standard for Safety Levels with Respect to Human Exposure to

Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.

• American National Standards Institute (C95.3-1992), IEEE Rec-

ommended Practice for the Measurement of Potentially Hazard-

ous Electromagnetic Fields– RF and Microwave.

• The following accessories are authorized for use with this prod-

uct. Use of accessories other than those speciﬁed may result in

RF exposure levels exceeding the FCC requirements for wireless

RF exposure; Belt Clip (MB-93, MB-94, MB-96N and MB-96F),

Rechargeable Li-ion Battery Pack (BP-232WP), Alkalies Battery

Case (BP-240 and BP-261) and Speaker microphone (HM-184).

o ensure that your expose to RF electromag-

netic energy is within the FCC allowable limits for

occupational use, always adhere to the following

guidelines:

• DO NOT operate the radio without a proper antenna attached, as

this may damaged the radio and may also cause you to exceed

FCC RF exposure limits. A proper antenna is the antenna sup-

plied with this radio by the manufacturer or antenna speciﬁcally

authorized by the manufacturer for use with this radio.

• DO NOT transmit for more than 50% of total radio use time (“50%

duty cycle”). Transmitting more than 50% of the time can cause

FCC RF exposure compliance requirements to be exceeded. The

radio is transmitting when the TX indicator lights red. You can

cause the radio to transmit by pressing the “VOX/PTT” switch.

• ALWAYS keep the antenna at least 2.5 cm (1 inch) away from

the body when transmitting and only use the Icom belt-clips

listed on page 30 when attaching the radio to your belt, etc.,

to ensure FCC RF exposure compliance requirements are not

exceeded. To provide the recipients of your transmission the best

sound quality, hold the antenna at least 5 cm (2 inches) from

your mouth, and slightly off to one side.

The information listed above provides the user with the information

needed to make him or her aware of RF exposure, and what to do

to assure that this radio operates with the FCC RF exposure limits

of this radio.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF energy that can

possibly cause interference with other devices or systems. To avoid

such interference, turn OFF the radio in areas where signs are posted

to do so. DO NOT operate the transmitter in areas that are sensitive to

electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Occupational/Controlled Use

The radio transmitter is used in situations in which persons are ex-

posed as consequence of their employment provided those persons

are fully aware of the potential for exposure and can exercise control

over their exposure.

CAUTION

WARNING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC- F3260 Series in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC- F3260 Series Manual

Product: