585846

Ibico Thermotronic 400 Manual

3
Zoom out
Zoom in
Previous page
1/28
Next page
Thermotronic 400
G
The cooling rack
• Assemble the cooling rack by placing each panel into the slots
provided in the separate base-plate.
Getting started
• Plug in and press the «on/off» key. After the working temperature
has been reached the green light comes on and an audible signal
will indicate the binding operation can commence.
Fanning and jogging the paper
• The sheets of paper must be fanned to ensure every sheet comes in
contact with the glue.
Inserting the paper in cover
• Ensure every sheets is inserted into the spine of the cover.
The binding operation
• The cover must be inserted into the binder so spine is in contact with
the heating element. The binding cycle will be released automatically
and visual indicated. After completion of the digital controlled binding
cycle the green light «ready» comes on and at
the same time an audible signal will be heard. This audible signal
will be reapeated as long as the document is left in the binding unit.
The binding unit is now ready to receive the next cover. 45 minutes
after the last binding operation an automatic security system turns
«off» the binding unit.
Removing the cover
• After audible signal is heard remove the document immediately.
Note: if document is left in the binding unit for too long, the quality
of binding could be affected. Jog the complete document once
firmly down on its spine. This ensures that every sheet is inserted
into the glue.
Selection of the right sized cover
Spine size
mm
1.5
3
4
6
8
10
12
15
20
25
30
35
40
45
50
No. of sheets
80gsm approx.
15
30
40
60
80
100
120
150
200
250
300
350
400
450
500
Squeezing the back
• Hold the completed document in one hand and with thumb and
one finger, squeeze the back together to ensure that the first and
last sheets are properly bound. This will also guarantee the correct
U-form of the cover spine.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ibico Thermotronic 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ibico Thermotronic 400 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info