681308
5
Zoom out
Zoom in
Previous page
1/108
Next page
KO 5
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it
must be withdrawn from use and removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device.
The safety of the device may be compromised, if for example:
Malfunctions occur.
The housing of the device shows damage.
The device has been subjected to excessive loads.
The device has been stored improperly.
Markings or labels on the device are illegible.
We recommend that a device displaying errors or in which an error is suspected be
sent back to i.safe MOBILE GmbH to be checked.
EXRELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety
regulations and has read and understood manual, safety instructions and certicate.
The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed.
To ensure the IP-protection, it has to be ensured that the all gaskets are present and
functional. IP protection is not guaranteed anymore if gaps are visible.
The device may only be charged outside ex-hazardous areas using the i.safe
PROTECTOR 2.0 or i.safe PROTECTOR 3.0 USB-cable or other equipment approved
by i.safe MOBILE GmbH.
Physical connections to other equipment are only allowed outside ex-hazardous
areas using the i.safe PROTECTOR 2.0 or i.safe PROTECTOR 3.0 USB-cable or other
equipment approved by i.safe MOBILE GmbH.
The device may be charged only at ambient temperatures in between +5°C ... +35°C.
The device must not be exposed to abrasive acids or bases.
The device must not be taken into zones 0 or 20.
Only accessories approved by i.safe MOBILE GmbH may be used.
In case the device has a hand strap, it is not allowed to do the adjustment of the hand
strap in ex-hazardous areas.
FURTHER SAFETY ADVISES
Do not touch the screen of the device with sharp objects. Dust particles and nails may
scratch the screen. Please maintain the screen clean. Remove dust on the screen with
a soft cloth gently, and do not scratch the screen.
Do not put the device in environments with excessive temperatures, as this could lead
to heating of the battery, resulting in re or explosion.
Do not charge the device near any ammable or explosive substances.
Charge the device under dry indoor conditions only.
Do not charge the device in environments with much dust or humidity.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for i.safe Mobile IS910.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of i.safe Mobile IS910.1 in the language / languages: All languages as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info