681244

i.safe Mobile IS520.2 Manual

5
Zoom out
Zoom in
Previous page
1/88
Next page
EN 5
Malfunctions occur.
The housing of the device shows damage.
The device has been subjected to excessive loads.
The device has been stored improperly.
Markings or labels on the device are illegible.
We recommend that a device displaying errors or in which an error is suspected be sent back
to i.safe MOBILE GmbH to be checked.
EXRELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood manual, safety instructions and certicate.
The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed.
To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional. There must be no large gap between the two halves of the housing.
The device may only be charged outside ex-hazardous areas using the appropriate charger or
other equipment approved by i.safe MOBILE GmbH.
For wired data connections please only use i.safe MOBILE GmbH approved accessories. The
use of cables for data transfer is not permitted in explosion hazardous areas.
The device may only be charged at ambient temperatures between +5°C ... +35°C.
The device may not be exposed to any aggressive acids or alkalis.
The device must not be taken into zones 0/20 or 1/21.
Only accessories approved by i.safe MOBILE GmbH may be used.
FURTHER SAFETY ADVISES
Do not touch the screen of the device with sharp objects. Dust particles and nails may scratch
the screen. Please maintain the screen clean. Remove dust on the screen with a soft cloth
gently, and do not scratch the screen.
Do not put the device in environments with excessive temperatures, as this could lead to
heating of the battery, resulting in re or explosion.
Do not charge the device near any ammable or explosive substances.
Charge the device under indoor conditions only.
Do not charge the device in environments with much dust or humidity.
The device may only be charged at ambient temperatures between +5°C ... +35°C.
Do not use the device in areas where regulations or legislatives prohibit the use.
Do not expose the device or charger to strong magnetic elds, such as are emitted from
induction ovens or microwaves.
Do not attempt to open or repair the device. Improper repair or opening can lead to the
destruction of the device, re or explosion. Only authorized personnel are allowed to repair
the device.
Only use accessories approved by i.safe MOBILE GmbH.
Power o the device in hospitals or other places where the use of mobile phones is prohibited.
This device may aect proper work of medical equipment, such as pacemakers. Always keep a
distance of at least 15 cm between the device and these devices.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for i.safe Mobile IS520.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of i.safe Mobile IS520.2 in the language / languages: All languages as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info