521900
4
Zoom out
Zoom in
Previous page
1/59
Next page
6 7
3. Status Icon
3.1 ARM Mode
In ARM Mode, the Smart Panel‘s alarm will sound and the red LED will ash when the system is
triggered.
3.2 ALERT Mode
In ALERT Mode, the Smart Panel‘s chime will sound and the green LED will ash when a visitor is
detected.
3.3 HOME Mode
In HOME Mode, the system can operate in both the ARM and ALERT modes in different zones.
The system comes with default settings that allow the system to operate directly after opening the
package, but the settings can be adjusted to suit individual requirements.
4. Setting your PIN
To program your new 4-digit PIN
Make sure that you are in Standby Mode before taking any further steps.
To make sure you are in Standby Mode:
Enter default PIN of then press . The ‘ ’ symbol on the display will then disappear.
Step 1: Enter factory default PIN of again then press . The ‘ ’ symbol on the display
will then disappear.
Step 2: Press then
to set new PIN.
Step 3: Enter your new 4-digit PIN then
.
Step 4: Re-enter your 4-digit PIN plus to conrm.
5. Enrolling the Remote Control
Note:
Before the key fob remote control supplied with the system is able to work it rst needs to be
enrolled (added onto the system) as follows:
Make sure that you are in Standby Mode before taking any further steps.
Step 1: Enter your 4-digit PIN (or default PIN of ) then press . The ‘ ’ symbol on the
display will then disappear.
Step 2: Press
then
to enter Remote Control Enrol mode.
Step 3: Then press any key on the Remote Control to enrol it onto the system.
Step 4: Press
to complete the enrolment.
9 V battery
6. Operating the ARM mode
Make sure that you are in Standby Mode before taking any further steps.
6.1 ARM the Alarm System
- Smart Panel
Enter your 4-digit PIN (or default PIN of
) followed by then press to activate the
ARM Mode.
- Remote Control
Press button
on the remote control to activate the ARM mode.
The default exit delay is 15 seconds, with a visual countdown, before the system is armed.
6.2 Disarming the Alarm System
Enter your 4-digit PIN (or default PIN of
) followed by to disarm the system.
- Remote Control
Press button
on the remote control to leave the mode.
The default entry delay time is 30 seconds, with a visual countdown, before the siren is activated.
7. Operating the ALERT Mode
Make sure that you are in Standby mode before taking any further steps.
7.1 Go into ALERT Mode
- Smart Panel
Enter your 4-digit PIN (or default PIN of
) followed by
then press
to activate
Alert Mode.
- Remote Control
Press
button on the remote control to activate the mode.
7.2 Exit ALERT mode
Enter your 4-digit PIN (or default PIN of ) followed by
to exit Alert Mode.
- Remote Control
Press
button on the remote control to leave the mode.
8. Muting the Audible Countdown
When the Smart Panel is armed the audible countdown (beeper) can be silenced by pressing the
MUTE button, during the countdown. To reactivate the audible countdown (beeper) the MUTE button
should be pressed again.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik WS-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik WS-100 in the language / languages: English, German as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info