521918
11
Zoom out
Zoom in
Previous page
1/13
Next page
10
12 Power indicate light
Power indicate light is green when the power is provided.
13 LINE IN socket
14 LINE IN cable
- LINE IN socket on the amplifier.
- HEADPHONE socket on an external audio device.
Play with Blue Tooth Device
You can listen to music from a bluetooth-enable device
via this player.
Pair the Bluetooth-enabled devices
The first time you connect your bluetooth device to this
player, you need to pair your device to this player.
Note:
- The operational range between this player and
a Bluetooth device is approximately 8 meters.
- Before you connect a Bluetooth device to this
unit, familiarize yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- Keep this player away from any other electronic
device that may cause interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to bluetooth (the indicate light
is orange)
3. Hold and press "
BF
/PAIR" button on remote control
for seconds to activate bluetooth pairing mode, and
the indicate light flashes (lights up every 2 seconds)
2. Search for bluetooth device with your device.
3. Select “BLUEPORT” in the pairing list.
4. Enter default password “0000, if the pairing succeeds,
then the indicate light turns orange and flashes
(lights off ever 2 seconds).
5. To disconnect connection, turn off the bluetooth
function on your device or switch the player to other
source.
Tip
- If there's a connection exist, hold and press "
BF
/
PAIR" button on remote control for seconds will re-
activate the pairing mode, the connection will be
interrupted.
- If there's no other bluetooth device pair with this
player in two minutes, the player will recovery previous
connection.
- The player will also be disconnected when your
device is moved beyond the operational range.
- If you want to reconnect your device to this player ,
place it within the operational range.
- If the device is moved beyond the operational range,
when it is brought back, please check if the device is
still connected with the player.
- If they are connected, indicate light flashes (lights off
every 2 seconds)
- If the connection is lost, indicate light keeps orange,
follow the instruction above to pair your device to the
player again.
Listen to music from bluetooth device
If the connected Bluetooth device supports Advanced
Audio Distribution Profile (A2DP), you can listen to the
music stored on the device through the player.
If the device also supports Audio Video Remote
Control Profile (AVRCP) profile, you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it support A2DP)
3. Use supplied remote control to control play
(if it support AVRCP)
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
H
/
G
buttons.
Replace the Remote Control Battery
1 Use needle to push the battery forward through the
hole on rear of remote control.
2 Remove the old battery. Place a new CR2025 battery
with correct polarity (+/-) as indicated.
Then install the battery into remote control.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for I-onik MSC-330 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of I-onik MSC-330 BT in the language / languages: English, German as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info