627068
5
Zoom out
Zoom in
Previous page
1/60
Next page
5
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
2. addiTional safeTy rUles
Always keep in mind that:
the machine must be switched off and disconnected from the power supply during maintenance and repairs,
clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap. Do not remove safety devices or
guards. Never use the machine while a guard is open. Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
3. specificaTions
Capacity
Swing Over Bed Ø 460mm
Swing Over Cross Slide Ø 270mm
Swing in Gap Diameter×Width 690×165mm
Height of Center 230mm
Distance Between Centers 1500mm
Width of Bed 300mm
Cutting Tool Max. Section 25 ×25mm
Total Travel of Cross Slide 285mm
Total Travel of Top Slide 128mm
Headstock
Spindle Bore Ø58mm
Spindle Nose D1-6
Spindle Morse Taper in Nose, in Sleeve MT6
Number of main shaft speeds Stepless speed regulating
Spindle Speeds Range 30-3000r.p.m
Thread & Feeds
Lead screw Diameter & Thread Ø35mm×4T.P.I. or Pitch 6mm
Threads Imperial Pitches 2-112 T.P.I. (60nos)
Threads Metric Pitches 0.1-14mm (41nos)
Diametrical Pitches 4-112D.P. (50nos)
Module Pitches 0.1-7M.P. (34nos)
Longitudinal Feeds Imperial 0.0011’’-0.0633’’/Rev (42nos)
Longitudinal Feeds Metric 0.031-1.7mm/Rev (42nos)
Cross-Feeds Imperial 0.00033’-0.01837’ (42nos)
Cross Feeds Metric 0.014-0.784mm (42nos)
Tailstock
Total Travel of Tailstock Quill 130mm
Tailstock Quill Diameter Ø60mm
Taper In Tailstock Quill MT4
Motor
Spindle Drive Motor 7.5kW 3PH
Coolant Pump Motor 0.1kW(1/8HP)
Weight & Measures
Machine Space Required
(LxWxH): cm 275x108x137
Packing Case Dimensions
(LxWxH): cm 280x112x156
Net Weight 1970kg
Gross Weight 2330kg
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 460 X 1500 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 460 X 1500 VAC in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info