627061
74
Zoom out
Zoom in
Previous page
1/76
Next page
74
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
14. deacTiVaTion
If the machine is to be out of use for a long period, it is advisable to proceed as follows:
1. Disconnect the machine from the power source.
2. Clean the coolant tank.
3. Clean the machine and lubricte/grease it.
4. Cover the machine if necessary.
15. disManTlinG
(due to deterioration and / or obsolescence)
General rUles
If the machine is to be permanently demolished and / or scrapped, divide the material to be disposed of according to
type and composition, as follows:
1. Cast iron or ferrous materials, composed of metal alone, are secondary raw materials, so they may be taken to an iron
foundry for re-smelting after having removed the contents (classified in point 3).
2. Electrical components including the cable and electronic material (magnetic cards, etc) fall within the category of
material classified as being assimilated to urban waste according to the laws of your local state, or federal government,
so they may be set aside for collection by the public waste disposal service.
3. Old minerals and synthetic an / or mixed oils, emulsified oils and greases are considered hazardous or special refuse,
so they must be collected, transported and disposed of at a special waste disposal service.
Attention
The standards and legislation concerning refuse are subject to change. The user must keep informed of the regulations at the
time of disposal as they may differ from those described above.
16. spare parTs
When ordering spare parts, always supply us with following data:
machine type
serial number
year it was build
name, number and code of the part (refer to the spare parts drawings and lists)
the quantity needed
In case the spare part can not be well identified on the drawing / in the list, to avoid delivery of the wrong part, it is
recommended to:
a) send us the original part
b) send a digital picture
Our products are frequently updated and improved. Minor changes may not yet be incorporated in this manual. Always
state the year of build, type and serial number of the machine in correspondence.
Manufacturer and importer assume no responsibility for defects which result from not reading the manual carefully or
wrong use of the machine. No rights can be derived from this manual.
All rights reserved. No part of this booklet may be reproduced in any form, by print, photoprint, microfilm or any other
means without written permission from the publisher.
© Huberts bv, Kennedylaan 14, Veghel, the Netherlands. Internet: www.huvema.nl
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 410 X 1000 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 410 X 1000 VAC in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 410 X 1000 VAC

Huvema HU 410 X 1000 VAC User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info