627045
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
Additional safety rules
Always keep in mind that:
the machine must be switched off and disconnected from the power supply during maintenance and repairs,
clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
Always wear safety glasses.
2. Main specificaTions anD feaTUres
This is a general- purpose drilling machine for hole machining operation. Two sets of motions, one is the
rotational movements of the spindle in its transmission box, the other is the rotational and vertical travel
movements of the spindle box along the vertical column, fulfil the machining operations of drilling, tapping,
reaming, boring, chamfering and spotfacing on different shapes of workpieces. The gear transmission system has
been applied, Which results in the compact structure and high rigidity to meet the needs of strong force cutting
operation. The double-speed motor has led a wide speed range and very easy and safe shifting. The drilling
machine suits the needs of machinery manufacturing and various kinds of repairing applications.
3. several Usage regUlaTions
1. Carefully read this user manual before start the machine.
2. Wearing gloves is not allowed when operate this machine, contacting the spindle and tools are also
forbidden when it is running.
3. The workpiece must be safely fastened, holding it with hands when in operation is strictly objected.
4. The machine has not short – circuit protection, the user is so required to connect a 6A protection switch.
Earth protection mist be well done.
5. Whenever a failure happens, call the qualified personal to repair it.
4. main specificaTions & parameTers
Max. drilling dia. 25mm
Max. Spindle travel 150mm
Spindle hole taper Morse No.3
Spindle speed variations 8
Speed Speeds 50Hz: 100 250 345 440 690 885 1450 2900rpm
60Hz: 126 245 415 530 830 1060 1740 3480rpm
Distance between spindle centre line and
vertical column surface
225mm
Bottom base dimension 300 X 305
Max. Distance between spindle face and
bottom base
445mm
Double-speed, 3 phase 0.55/0.75KW,
50Hz: 1400/2800rpm
60Hz: 1680/3360rpm
Machine overall dimension 58X470X1000mm
Weight 170kg
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 25 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 25 T in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 25 T

Huvema HU 25 T User Manual - German - 16 pages

Huvema HU 25 T User Manual - Dutch - 16 pages

Huvema HU 25 T User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info